5" Exhaust Vibration

[cumminsdieselfreak]

Your down pipe is probably rubbing the frame.

You'll need to take the down pipe off and you'll see exactly where it's rubbing.

Take a hammer and make an indention in the down pipe so it'll clear the frame.

This is extremely common on some trucks that have 5" down pipes.

 0 Comment(s)

[GraveyBoat]

Make sure the V-band is good and tight.

Mine had a vibration at idle in gear not moving, the V-band/down pipe were the culprit.

It was only a few turns, made a big improvement.

 0 Comment(s)

[coryscummins]

Your down pipe is probably rubbing the frame.

You'll need to take the down pipe off and you'll see exactly where it's rubbing.

Take a hammer and make an indention in the down pipe so it'll clear the frame.

This is extremely common on some trucks that have 5" down pipes.

I have seen this scenario.

 0 Comment(s)