Thanks Thanks:  14
Likes Likes:  58
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: 2017 Ram 6.7 Cummins - EGT Probe Install

  1. Top Of Page | #1
    J. "Fuente" Holen jholen's Avatar

    User Info Menu

    2017 Ram 6.7 Cummins - EGT Probe Install

    Greetings!

    Took the passenger wheel well off for easier access to exhaust manifold.

    Any input on where exactly to drill/tap?

    Picture below:

    20200623_085521.jpg


  2. Likes watersupply189, AK Bob, timshooter40 liked this post
  3. Top Of Page | #2
    TexNeck's Avatar

    User Info Menu

    Re: 2017 Ram 6.7 Cummins - EGT Probe Install

    I would try and get it right on where the collection area enters the turbo. This is the most accurate place IMO. If you need a flatter spot then I would error toward the left in your pic/back nearer cylinder 6

    2013 Ram 2500
    John 3:16 - Philippians 4:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    mike@ddpmotorsports.com
    www.ddpmotorsports.com



  4. Thanks watersupply189, jholen thanked for this post
  5. Top Of Page | #3
    J. "Fuente" Holen jholen's Avatar

    User Info Menu

    Re: 2017 Ram 6.7 Cummins - EGT Probe Install

    Quote Originally Posted by TexNeck View Post
    I would try and get it right on where the collection area enters the turbo. This is the most accurate place IMO. If you need a flatter spot then I would error toward the left in your pic/back nearer cylinder 6
    Awesome!

    Thanks.

    Gonna jack it up and pull the wheel off for some more working room.


  6. Likes watersupply189, AK Bob, timshooter40 liked this post
  7. Top Of Page | #4
    J. "Fuente" Holen jholen's Avatar

    User Info Menu

    Re: 2017 Ram 6.7 Cummins - EGT Probe Install


  8. Thanks watersupply189, kevinh thanked for this post
  9. Top Of Page | #5
    TexNeck's Avatar

    User Info Menu

    Re: 2017 Ram 6.7 Cummins - EGT Probe Install

    Well done!!

    2013 Ram 2500
    John 3:16 - Philippians 4:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    mike@ddpmotorsports.com
    www.ddpmotorsports.com



  10. Thanks jholen thanked for this post
  11. Top Of Page | #6
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Re: 2017 Ram 6.7 Cummins - EGT Probe Install

    Nice install, great to see you used all the right tools and took all the proper precautions.

    Good example on how to do the job right!


    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

    Sent from my iPhone using Tapatalk

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  12. Thanks jholen thanked for this post
  13. Top Of Page | #7
    J. "Fuente" Holen jholen's Avatar

    User Info Menu

    Re: 2017 Ram 6.7 Cummins - EGT Probe Install

    Thanks gents! Went very slow and replaced grease each time.


  14. Top Of Page | #8
    #1 VENDOR cumminsdieselfreak's Avatar

    User Info Menu

    Re: 2017 Ram 6.7 Cummins - EGT Probe Install

    Quote Originally Posted by TexNeck View Post
    I would try and get it right on where the collection area enters the turbo. This is the most accurate place IMO. If you need a flatter spot then I would error toward the left in your pic/back nearer cylinder 6
    Excellent!

    2018 Ram 2500 4x4 G56
    Romans 10:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    joe@ddpmotorsports.com
    www.ddpmotorsports.com


  15. Thanks jholen thanked for this post
    Likes watersupply189, jholen, timshooter40 liked this post
  16. Top Of Page | #9
    hsshorty6.7's Avatar

    User Info Menu

    Re: 2017 Ram 6.7 Cummins - EGT Probe Install

    Years ago on my 2007 6.7L I drilled and tapped with the engine running so as to blow out any metal chips rather than take the chance of any chips falling into the turbo.

    I used the grease as well.

    It worked for me.

    Nice job on your install.


  17. Likes watersupply189, BrentM, timshooter40 liked this post
  18. Top Of Page | #10

    Re: 2017 Ram 6.7 Cummins - EGT Probe Install

    Quote Originally Posted by jholen View Post
    Thanks gents! Went very slow and replaced grease each time.
    What size drill bits did you use prior to the final one?

    I am planning on doing this, this weekend.

    Sent from my Pixel 3a XL using Tapatalk


  19. Thanks jholen thanked for this post
    Likes jholen, watersupply189, timshooter40 liked this post
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •