Greetings!
Took the passenger wheel well off for easier access to exhaust manifold.
Any input on where exactly to drill/tap?
Picture below:
20200623_085521.jpg
Greetings!
Took the passenger wheel well off for easier access to exhaust manifold.
Any input on where exactly to drill/tap?
Picture below:
20200623_085521.jpg
I would try and get it right on where the collection area enters the turbo. This is the most accurate place IMO. If you need a flatter spot then I would error toward the left in your pic/back nearer cylinder 6
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Awesome!
Thanks.
Gonna jack it up and pull the wheel off for some more working room.
Well done!!
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Excellent!
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
If I leave the EGR and cooler on for now do I need the probe?
No, you don’t need a probe unless you want to monitor your EGT’s.
2016 Ram Laramie 3500, G56, 6.7, CC, 4x4
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
Nice install, great to see you used all the right tools and took all the proper precautions.
Good example on how to do the job right!
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.
Sent from my iPhone using Tapatalk
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
Thanks gents! Went very slow and replaced grease each time.
Bookmarks