Thanks Thanks:  2
Likes Likes:  8
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Need To Replace My Drag Link

  1. Top Of Page | #1
    Basic Member ChrylerTech's Avatar

    User Info Menu

    Need To Replace My Drag Link

    Thanks to an error in judgement during the manufacturing process there are way to many of our 2500 and 3500 trucks driving the streets with a potential drag link issue.

    The jam nuts move away from the shuttle and can cause loss of control.

    There is a safety recall that has been released for this safety concern.

    However the Recall V06 in my opinion is not a repair but a mistake.

    As a certified Chrysler tech I perform this recall at least once a week at the dealership I work for.

    After verifying that your jam nuts torque to the shuttle correctly and the threads on the drag link are not damaged, I perform the part of the recall that leads me to asking for advice.

    I weld the jam nuts to the shuttle, the performance of the welds renders alignments impossible without replacement of the entire drag link.

    I have had this recall performed on my truck and the steering wheel is no longer straight as well I noticed the other day my truck pulling to the right and the toe set on my tires is off causing unneeded inner edge wear.

    Does anyone have or use a after market drag link setup that they prefer over the factory?

    My truck is still currently stock and would rather not have to spend extra money at this time to replace my drag link with a much better setup.

    Lift kit and suspension upgrades are planned for the future.

    Thank you all in advance.


  2. Likes AK Bob liked this post
  3. Top Of Page | #2
    #1 VENDOR cumminsdieselfreak's Avatar

    User Info Menu

    Re: Need To Replace My Drag Link

    Quote Originally Posted by ChrylerTech View Post
    Thanks to an error in judgement during the manufacturing process there are way to many of our 2500 and 3500 trucks driving the streets with a potential drag link issue.

    The jam nuts move away from the shuttle and can cause loss of control.

    There is a safety recall that has been released for this safety concern.

    However the Recall V06 in my opinion is not a repair but a mistake.

    As a certified Chrysler tech I perform this recall at least once a week at the dealership I work for.

    After verifying that your jam nuts torque to the shuttle correctly and the threads on the drag link are not damaged, I perform the part of the recall that leads me to asking for advice.

    I weld the jam nuts to the shuttle, the performance of the welds renders alignments impossible without replacement of the entire drag link.

    I have had this recall performed on my truck and the steering wheel is no longer straight as well I noticed the other day my truck pulling to the right and the toe set on my tires is off causing unneeded inner edge wear.

    Does anyone have or use a after market drag link setup that they prefer over the factory?

    My truck is still currently stock and would rather not have to spend extra money at this time to replace my drag link with a much better setup.

    Lift kit and suspension upgrades are planned for the future.

    Thank you all in advance.
    The Synergy Drag Link is hands down on of the best drag links that you can buy for these trucks.

    We sell a ton of them and will be what goes on my 2018 once I put a few more miles on it.

    I'll shoot you a PM.

    2018 Ram 2500 4x4 G56
    Romans 10:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    joe@ddpmotorsports.com
    www.ddpmotorsports.com


  4. Likes AK Bob, SyN liked this post
  5. Top Of Page | #3
    Murph's Avatar

    User Info Menu

    Re: Need To Replace My Drag Link

    Any pics of the part and location?

    Difficulty in changing?


  6. Top Of Page | #4
    DIESELWRKS's Avatar

    User Info Menu

    Re: Need To Replace My Drag Link

    Im grinding off the tac welds that they put on. I will get my alignment done. I will be just putting safety wire wrapped from nut to nut. they wont come loose. if you really need something now you can look for a 2019 drag link. its a different design and it will fit.

    2017 WON TON CC LB 68AUTO
    Secret stuff that make it vroom and whistle better Thuren 2.25 w/2.0 Fox Resi

    Justin
    Southern Oregon ( the Republican part)
    UNITEDSTATES MARINE CORPS 1993-2007
    No better friend, No better enemy.

  7. Top Of Page | #5
    Ddixon1993's Avatar

    User Info Menu

    Re: Need To Replace My Drag Link

    As stated above synergy makes and awesome product. I got it and a carli track bar and am very happy with both. Next up is a re-gear then a carli pintop 3.25" suspension system. Fun never stops

    Sent from my SM-N960U using Tapatalk


  8. Top Of Page | #6
    P2609 Fanatic Electrojake's Avatar

    User Info Menu

    Re: Need To Replace My Drag Link

    Greetings @Chrylser Tech

    The day I got the drag link recall notice in the mail I ordered a Synergy HD drag link.

    The UPS guy dropped it off a couple days later and I installed it in about an hour.

    I did similar with the water pump recall... Soon as I got the notice I called Geno's and had them send me a Gates Pump.

    No surprises. In and done!

    As for the Synergy drag link, here are a few pictures of it next to the OEM link. . .

    OEM is the top, Synergy under it.


    ...
    ...
    ...
    Pic below is Synergy top, OEM bottom. . .


    ...
    ...
    ...
    The pic below is the Synergy adjuster with the link installed on my 2016 3500. . .



    It's been in service for about a year now. No issues at all.
    -Jake-

    2016 Longhorn 3500, 4x4 shortbed CrewCab, Cummins HO/AISIN, 99.8% stock.
    * Hauling a 2018 Northstar Arrow-U. Scale weight 12,400 Lb.

  9. Likes cumminsdieselfreak, Power247 liked this post
  10. Top Of Page | #7
    #1 VENDOR cumminsdieselfreak's Avatar

    User Info Menu

    Re: Need To Replace My Drag Link

    One of my jam nuts were finger loose last week so I ordered the Synergy and put it on today.

    The steering feels so much tighter, highly recommend them.

    PM me if anyone would like to order one.

    2018 Ram 2500 4x4 G56
    Romans 10:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    joe@ddpmotorsports.com
    www.ddpmotorsports.com


  11. Likes Power247, Electrojake liked this post
  12. Top Of Page | #8
    Grassroots1964's Avatar

    User Info Menu

    Re: Need To Replace My Drag Link

    Is there enough adjustment on the Synergy that I will be able to put a 2.5 level kit and still be able to use the Synergy?


  13. Top Of Page | #9
    JonMikal's Avatar

    User Info Menu

    Re: Need To Replace My Drag Link

    I have the Synergy drag link and i am leveled 2.5 inches.

    Works like a champ at that height.

    18 CCSB 4x4 Cummins. Deleted Race Me Ultra Tuned, 2nd Gen Swapped. Carli built front end with King 2.5's on all 4 corners on 35x12.50's. All Alpine type R speakers 2 10's in Fox Accoustics vented underseat box 4K watts.

  14. Top Of Page | #10
    #1 VENDOR cumminsdieselfreak's Avatar

    User Info Menu

    Re: Need To Replace My Drag Link

    Quote Originally Posted by Grassroots1964 View Post
    Is there enough adjustment on the Synergy that I will be able to put a 2.5 level kit and still be able to use the Synergy?
    Yes, my truck has a 2.5" leveling kit and everything works perfect.

    2018 Ram 2500 4x4 G56
    Romans 10:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    joe@ddpmotorsports.com
    www.ddpmotorsports.com


Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •