Thanks Thanks:  2
Likes Likes:  12
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: CCV DELETE W/CATCH CAN

  1. Top Of Page | #1
    DiggerDave's Avatar

    User Info Menu

    CCV DELETE W/CATCH CAN

    DID my CCV Delete today nice n clean.

    diggerdave's rig...name bluedemon 2 2008 6.7 cummins

    -bilstein 5100's all 5 shocks-fully deleted-greg weld ballistic rims w/35" nitto trail grappler shoes-7" canon stacks miters-H&S tuned -afe cai-iron cross front and rear bumper-buncha bd diesel parts

  2. Thanks AnOldBiker, SyN thanked for this post
    Likes AnOldBiker, SyN, Power247, walla2k5, AK Bob liked this post
  3. Top Of Page | #2
    DiggerDave's Avatar

    User Info Menu

    Re: CCV DELETE W/CATCH CAN

    tonkatoy liked mine so much he just ordered one LOL


  4. Likes AnOldBiker liked this post
  5. Top Of Page | #3
    DiggerDave's Avatar

    User Info Menu

    Re: CCV DELETE W/CATCH CAN

    i think im gonna buy some manifold paint and rattle can


  6. Likes AnOldBiker liked this post
  7. Top Of Page | #4
    TH-64's Avatar

    User Info Menu

    Re: CCV DELETE W/CATCH CAN

    I like it. Is that a kit or a DiggerDave fabrication?

    Sent from my SM-G950U using Tapatalk

    2012 CCSB Saddle Brown Pearl... DRD tuned

  8. Top Of Page | #5
    TW24COUGARS's Avatar

    User Info Menu

    Re: CCV DELETE W/CATCH CAN

    Yea I would like to know where you got that? That looks great!


    Sent from my iPhone using Tapatalk

    2013 Ram 2500, 4 door, short bed, MM3 by DRD, S&B Cold Air Intake, Jamo 4inch Exhaust with muffler and tip, Shibby Plugs, Supernova V4 LED headlight bulbs

  9. Top Of Page | #6
    Rambling Rump Ranger! SyN's Avatar

    User Info Menu

    Re: CCV DELETE W/CATCH CAN

    Dave: is that rascal going to omit a some what oily fume all over the engine bay?

    Or is the right side (Smaller Hose) connected down below & there is a slight vacuum - pulling the oily vapor away if any?

    That for sure is a nice looking clean set up!

    2017 Bighorn (Delmonico Red & Chrome) CC-HD2500-4WD-6.7L-3:42w/Anti-Spin
    Oil: -SHELL- Rotella T6 5W-40 & T5 15W-40 combo w/LF16035
    68RFE/BW44-46/Power Steering: -Red Line- C+ ATF
    Frontend & Rearend: -Red Line- SAE GL-5 75W-90NS
    Many Small Mods: Interior & Exterior
    Mileage: 28,541

  10. Top Of Page | #7
    DiggerDave's Avatar

    User Info Menu

    Re: CCV DELETE W/CATCH CAN

    yes basically made my own kit LOL ,,,got the catch can on amazon,,,,,shes a baffled catch can so done right with a dipstick so ya can keep an eye on it ..the oil goes in 1 way and the fumes go either out the filter or out port on the second hose all oil stays in the can ,,,same idea as all the other cars that use them ... the catchcan cost me 46 bucks canadian shipped the plug for the cai oiltube 3 bucks 2' hose 4 bucks ...notta bad kit i can make a killin LOL


  11. Likes walla2k5, AK Bob liked this post
  12. Top Of Page | #8
    TW24COUGARS's Avatar

    User Info Menu

    Re: CCV DELETE W/CATCH CAN

    Quote Originally Posted by DiggerDave View Post
    yes basically made my own kit LOL ,,,got the catch can on amazon,,,,,shes a baffled catch can so done right with a dipstick so ya can keep an eye on it ..the oil goes in 1 way and the fumes go either out the filter or out port on the second hose all oil stays in the can ,,,same idea as all the other cars that use them ... the catchcan cost me 46 bucks canadian shipped the plug for the cai oiltube 3 bucks 2' hose 4 bucks ...notta bad kit i can make a killin LOL
    Did that cause any codes to be thrown?

    I’m thinking about doing the same.

    My truck is DRD tuned, wasn’t sure if I can get rid of any check engine lights with the tuner for that.

    2013 Ram 2500, 4 door, short bed, MM3 by DRD, S&B Cold Air Intake, Jamo 4inch Exhaust with muffler and tip, Shibby Plugs, Supernova V4 LED headlight bulbs

  13. Likes AK Bob liked this post
  14. Top Of Page | #9
    DiggerDave's Avatar

    User Info Menu

    Re: CCV DELETE W/CATCH CAN

    Quote Originally Posted by TW24COUGARS View Post
    Did that cause any codes to be thrown?

    I’m thinking about doing the same.

    My truck is DRD tuned, wasn’t sure if I can get rid of any check engine lights with the tuner for that.
    as soon as u take the filter out yur gonna get a code for crankcase filter restriction,,,but ,,after the instal go sit in yur truck and put the key to on position,,within 10 sec press and depress yur brake pedal ,then go to yur eccel pedal and press it 2 times the same way then turn the key to off position,,,that will reset your service blah blad light ,,,then at that time clear the codes and yur good to go


  15. Likes AK Bob liked this post
  16. Top Of Page | #10
    OneTon's Avatar

    User Info Menu

    Re: CCV DELETE W/CATCH CAN

    Quote Originally Posted by DiggerDave View Post
    DID my CCV Delete today nice n clean.
    I like that setup! Gotta do something similar to mine.

    I'm vented down by the axle and I get oil everywhere...specially when I'm towing heavy.

    Is the smaller hose vented to the atmosphere or connected to the port on the turbskie?

    Do you happen to have the link to that can?

    2015 Ram 3500 CCSB SRW 4x4 G56
    2020 Ram 2500 CCSB 4x4 68RFE

    Never ending project. Always adding something...

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •