Thanks: 49
Likes: 179
Awesome work! Most people would have just done a cheesy repair and sent it down the road. You are doing all of this the right way knowing you are selling it. Good for you sir! Looking forward to the finished product. I am trying to learn TIG welding now, and soon will be trying some body repairs myself on my old Jeep. Keep up the good work!
Originally Posted by Polaraco
cumminsbadgirl thanked for this post
I dunno if you have been keeping up.
I forgot to tell you I'm using "Heat Fence" on the panel.
It's a paste you liberally smear around the weld area to prevent wARPage.
Stuff works pretty good.
Since my mig is busted, I'll have to tig which will keep wARPing down too.
So far, I don't see any. I don't trust these welds because I've been having penetration issues.
Can't set the mig right.
The wire speed pot went bad.
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
You do some good work!!
2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
cumminsbadgirl thanked for this post
cumminsbadgirl liked this post
Wow Steve!
A little paint and no one will ever know.
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
cumminsbadgirl thanked for this post
Dang that's looking good.
Maybe when you finish you can help me with mine.
I'll do the back braking work and you walk me through it haha.
cumminsbadgirl thanked for this post
The worst conditions you could ask for and a bunch of shARP pains shooting out of my back, Caused me to flinch with the spray gun. Hot, Humid, windy (5MPH).
Took this pic right after I put the last coat on.
It's tightening up, but still has a few spots that need attention, not to mention the dirt the wind blew on it. It was like working in a wind tunnel
@AnOldBiker JIM! Come out here and clean up for me.
My back is done.
I had to force myself to get this painted.
Taking a day off to recover.
All I have left is to paint the fender flair and install it.
Then I'll get @F350Cummins to put the wheel back on.
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Looks great Steve!!
2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
cumminsbadgirl liked this post
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
03 unicorn, Thomas1960, watersupply189, DieselDingus, Noneck, cumminsbadgirl, AK Bob liked this post
Looks like you got a brand new truck now! Awesome job
2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
cumminsbadgirl liked this post
Posting Permissions
Register To Reply
Bookmarks