I have 4" Jamo turbo back on my 2017.
I'm looking to put a muffler on it to stop the drone and quite it down a little without messing with the flow to much. anyone recommend one?
Thanks: 10
Likes: 54
I have 4" Jamo turbo back on my 2017.
I'm looking to put a muffler on it to stop the drone and quite it down a little without messing with the flow to much. anyone recommend one?
I installed a 17" FTE resonator.
It knocked the drone down in the cab but still left a really good sound outside.
They make a 30" if you want to reduce the sound a little more.
2016 Ram 2500 Mega Cab - 68RFE - Carli 2.5" level coils - Carli radius arm drops - Carli 1" rear coils w/ RC 1" rear spacers - 17x8.5 0mm Method Mesh - 37x13.50r17 Toyo R/T - AAM 4.10 gears - Airlift 5000 bags - Airlift Wireless OBO - PacBrake Oil Filter Relocator
https://www.igotacummins.com/showthread.php?p=184223
Oops. Just realized these are 5".
Sent from my SM-G950U using Tapatalk
2012 CCSB Saddle Brown Pearl... DRD tuned
watersupply189 liked this post
I put a stainless Cherry Bomb on mine about a month ago and really like it.
It's a straight through 4" design with a 7" can 30" long.
Summit Racing had them for $42.00.
You have a sound clip of what that cherry bomb sounds like and some pics?Originally Posted by 16 Cummins
2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
[QUOTE=watersupply189;186788]You have a sound clip of what that cherry bomb sounds like and some pics?
I can get it tomorrow. It sounds much like the Flo-Pro that I had on my last truck. Not much louder than stock at idle but can hear the exhaust brake scream. It's finally getting warm enough to ride with the windows down to hear it. No sound with windows up.
watersupply189 thanked for this post
[QUOTE=16 Cummins;186791]Looking forward to hearing it.
2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
20200517_080200.jpg
It's 24" on the 7" diameter can with a 4" perforated straight core. I'll have to wait till eveyone is up to start it and get a sound clip. It's just ahead of where the tailpipe goes over the axle. I used a ebay race pipe and this muffler, both 409 SS and still retained the ability to go back to stock if need be.
Did ya get the Jamo muffler with your system, or no?
Good stuff.... Truckers bring it
No.
I wanted to see how it was without one LOL.
It’s not terrible but want to quite it down a little.
Posting Permissions
Register To Reply
Bookmarks