Thanks: 4
Likes: 49
Just order the billet valve body from Revmax.
Started to slowly do some work to my 17 3500.
Next week I will be ordering an MM3 from Double R Diesel.
4.56 gears are gonna be on the list shortly as well.
Can't wait to get my tuning going with the valve body.
99 percent stock with only the silencer out of the intake right now.
Anyone else running this valve body?
IGOTACUMMINS thanked for this post
In our opinion its the best on the market.
Yup I am running one, definitely with the tuning line pressure is where it. Should be
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
Also you need a deep pan for the billet zeroflex.
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
I ordered a revmax pan as well.
I was also thinking about a low stall converter from them as my vb ain't shipping till Monday or so.
Not sure if I wanna pull the trans out though.
Full send bud.
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
IGOTACUMMINS thanked for this post
Full broke hahah. Then I might as well get a new flex plate. Where does it end hahah
watersupply189 liked this post
LOL, that's awesome, yup but while you're in there might as well do it right.
They lock up so much better, you won't regret it.
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
So I bucked up and bought a stage 5 17 blade low stall converter and billet flex plate from revmax as well.
Should have it out west in canada in a few weeks.
Posting Permissions
Register To Reply
Bookmarks