Thanks: 4
Likes: 11
Hey, I’m looking for a leveling kit for my 2013 Cummins 2500.
It does not have air suspension.
I have already looked into the Carli and Thuren kits.
I’m interested to see what luck everyone has had with cheaper “block” style kits such as BDS or other.
Thanks!
watersupply189 thanked for this post
watersupply189 liked this post
And to specify I’m looking for a 2” kit.
watersupply189 thanked for this post
watersupply189 liked this post
Have a cheapo eBay kit 2inch on my 2013 and love it.
I didn't even have to adjust the steering wheel.
Been on for 5 years including snow plowing.
No issues whatsoever.
Sent from my SM-G965U using Tapatalk
2013 Laramie 2500 CC. Warp tuning on RaceMe. 2 inch level w/35s.
I have Rough Country leveling on mine for the past 3 years without any issues at all.
2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
IGOTACUMMINS thanked for this post
PM sent.Originally Posted by laramiecummins
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
watersupply189 liked this post
Any idea what kind of kit it is? I just need the front to come up about an inch. Thanks
Sent from my iPad using Tapatalk
16' Ram 2500, long bed, 3000lb toolbox, MM3 tuner, EGRless tuned by DRD, kicker 12's, viper alarm with remote start. Delete warp tunes by DRD, 12v sound, whistle sound, race pipe exhaust & 30” FTE resonator
19’ Jeep Grand Cherokee limited
watersupply189 liked this post
Not really.
When I was looking there were dozens of brands.
They are all CNC cut and Laser welded. Don't overthink it.
In the end it's just a spacer block. I've never heard of one failing.
On my 03 I did a 3 inch and the front end shifted over and the steering wheel was off center until I fixed it. (it really should have had an adjustable track bar but I never added one)
The 2 inch I did on this was perfect.
Didn't negatively effect the steering or wheel alignment, and it's just barely not level.
When truck is towing it only squats slightly.
I found it to be a really good height.
It improved the ride because instead of being nose down into bumps and dips it was almost level and made a noticeable difference but had less negative effect than the 3 inch.
Sent from my SM-G965U using Tapatalk
2013 Laramie 2500 CC. Warp tuning on RaceMe. 2 inch level w/35s.
Houairman thanked for this post
watersupply189 liked this post
Pretty simple & there is 1.5”, which should work.
I carry lots of weight in the back, don’t want the front higher than the rear.
Thanks.
Sent from my iPad using Tapatalk
16' Ram 2500, long bed, 3000lb toolbox, MM3 tuner, EGRless tuned by DRD, kicker 12's, viper alarm with remote start. Delete warp tunes by DRD, 12v sound, whistle sound, race pipe exhaust & 30” FTE resonator
19’ Jeep Grand Cherokee limited
watersupply189 liked this post
Im in the market for a leveling kit as well. I have been looking at the Fox 2.0s for shocks. I went with a 2" spacer kit on my 05 and it worked well. My '14 already had a leveling kit on it so, I never knew the height on it. With all that being said, do I need a 2' or 2.5" level for the front? Another question someone may know. The Fox 2.0s can be adjusted in the front from 2"-3". Do I still need to put a block spacer in?
watersupply189 liked this post
Posting Permissions
Register To Reply
Bookmarks