Thanks Thanks:  5
Likes Likes:  49
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Scan Tool

  1. Top Of Page | #1
    Basic Member

    User Info Menu

    Scan Tool

    Hello everyone, I need some guidance looking to buy a small scanner to do some work n my truck, what scan tools are you using?

    Looking to stay under the 400.00 dollar

    Looking at this one.




    Sent from my iPhone using Tapatalk


  2. Top Of Page | #2
    Rambling Rump Ranger! SyN's Avatar

    User Info Menu

    & I'm afraid I can't help much with your question...

    Others will chime in when the sun comes up and give you some advice! I'm @ work right now and finishing up paper work before going home.

    2017 Bighorn (Delmonico Red & Chrome) CC-HD2500-4WD-6.7L-3:42w/Anti-Spin
    Oil: -SHELL- Rotella T6 5W-40 & T5 15W-40 combo w/LF16035
    68RFE/BW44-46/Power Steering: -Red Line- C+ ATF
    Frontend & Rearend: -Red Line- SAE GL-5 75W-90NS
    Many Small Mods: Interior & Exterior
    Mileage: 28,541

  3. Thanks juarez454, watersupply189 thanked for this post
  4. Top Of Page | #3
    Basic Member

    User Info Menu

    Thank you same here I’m working also.

    I’m looking for something to do a little more than read the codes, but don’t want to brake the bank. LOL


    Sent from my iPhone using Tapatalk


  5. Top Of Page | #4
    Basic Member KWicker's Avatar

    User Info Menu

    I'll be following this, also curious about scan tools for the Cummins.

    I think there are two sides for the diagnostics on a Cummins RAM.

    The RAM or FCA side and the Cummins side.

    Don't quote me but if remember correctly that is how the more in depth diagnostics work on these trucks.

    If not I hope someone can clear it up.....I am also curious.

    Sent from my SM-G975U using Tapatalk


  6. Top Of Page | #5
    Old... But Still Here! AnOldBiker's Avatar

    User Info Menu



    Jim


    2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17

    "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan

  7. Top Of Page | #6
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Quote Originally Posted by juarez454 View Post
    Thank you same here I’m working also.

    I’m looking for something to do a little more than read the codes, but don’t want to brake the bank. LOL


    Sent from my iPhone using Tapatalk
    Welcome!
    I would highly recommend you look into AutoEnginuity, you will end up $80 over your budget with the Chrysler Enhancement and you will need to have access to a Windows PC laptop.

    https://www.autoenginuity.com/products/scantool/


    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

    Sent from my iPad using Tapatalk

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  8. Thanks cumminsbadgirl thanked for this post
  9. Top Of Page | #7
    #1 VENDOR cumminsdieselfreak's Avatar

    User Info Menu

    Welcome to the forum!!

    2018 Ram 2500 4x4 G56
    Romans 10:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    joe@ddpmotorsports.com
    www.ddpmotorsports.com


  10. Top Of Page | #8
    david3gen's Avatar

    User Info Menu

    Re: Scan Tool

    Welcome @juarez454


    Sent from my iPhone using Tapatalk

    2006 dodge ram 2500 laramie crew cab 5.9 cummins. 10x20 et-24 fuel offroad with 275.60r20 tires. bully dog gt tuner. 48re ATS built tranny triple disc converter ATS oilpan and transgo quick shifter. 4" turbo back exhaust. brembo discs and pads

  11. Top Of Page | #9
    MOD watersupply189's Avatar

    User Info Menu

    Re: Scan Tool

    Quote Originally Posted by juarez454 View Post
    Hello everyone, I need some guidance looking to buy a small scanner to do some work n my truck, what scan tools are you using?

    Looking to stay under the 400.00 dollar

    Looking at this one.

    https://uploads.tapatalk-cdn.com/202...3e554819b2.jpg


    Sent from my iPhone using Tapatalk
    Welcome friend!

    Not familiar with this one.

    Following this!


    2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  12. Top Of Page | #10
    Diesel Babe cumminsbadgirl's Avatar

    User Info Menu

    Re: Scan Tool

    Hello and welcome @juarez454
    Enjoy our forum!


    2014 CUMMINS "BADGIRL" Laramie MC 3500 (Aisin) 4X4 MM3 Tuned by Double R Diesel *** EGR delete AFE CAI 4” FLO-PRO w/muffler 4" Zone lift, Federal Couragia 37’s with Black Rhinos,bed carpet kit, tail-gate assist, Retrax tunnau cover

    Previous "Cummins Badgirls" :
    2006 Cummins 2500 4x4
    2012 Cummins 2500 4x4

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •