Thanks Thanks:  1
Likes Likes:  11
Results 1 to 6 of 6

Thread: Flatbed Install

  1. Top Of Page | #1

    Flatbed Install

    Hey everyone,

    Just put a new CM flatbed on my 18 Bigh Horn 3500 DRW and getting the right and left tail light out due to the flatbed LEDs.

    Odd thing is it blinks fast on the dash but blinks normal on the flatbed.

    What does a feller need to do?

    Thanks!

    '18 Ram 3500 HD 6.7 Cummins G56-- CM Skirted Flatbed (Fully Deleted, AirDog165, Valair Quiet Street Dual Disk)
    '20 Chevrolet 3500 Duramax SRWLB -- Deleted CTT Tuning
    '19 Indian Chieftain Dark Horse
    '20 Jeep Wrangler Unlimited Rubicon
    '19 Chevrolet Corvette Z06 M7
    '73 Chevrolet Corvette

  2. Thanks watersupply189 thanked for this post
    Likes watersupply189, timshooter40 liked this post
  3. Top Of Page | #2
    Crshanta's Avatar

    User Info Menu

    Re: Flatbed Install

    AlphaOBD and an Android device. You will also need your four digit pin and a rsa unlock device. I assume since you lost some exhaust parts, you already have an rsa unlock device. You can set the rear lights to LED and just about any other body control related change.

    or take it to the dealer and have them change to led taillights.

    To get the four digit pin, you will have to go to the dealer parts counter to obtain. It is hit or miss on if they will provide it.

    2018 srw 3500

  4. Likes watersupply189, timshooter40 liked this post
  5. Top Of Page | #3

    Re: Flatbed Install

    Thanks for the info, I appreciate it.

    '18 Ram 3500 HD 6.7 Cummins G56-- CM Skirted Flatbed (Fully Deleted, AirDog165, Valair Quiet Street Dual Disk)
    '20 Chevrolet 3500 Duramax SRWLB -- Deleted CTT Tuning
    '19 Indian Chieftain Dark Horse
    '20 Jeep Wrangler Unlimited Rubicon
    '19 Chevrolet Corvette Z06 M7
    '73 Chevrolet Corvette

  6. Likes watersupply189, timshooter40 liked this post
  7. Top Of Page | #4
    HKBIGDADDYDIESELDAN's Avatar

    User Info Menu

    Re: Flatbed Install

    Welcome to the family

    2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
    Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs

  8. Likes watersupply189, timshooter40 liked this post
  9. Top Of Page | #5
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Re: Flatbed Install

    Welcome!


    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

    Sent from my iPad using Tapatalk

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  10. Likes watersupply189, timshooter40 liked this post
  11. Top Of Page | #6
    timshooter40's Avatar

    User Info Menu

    Re: Flatbed Install

    2016 Ram 2500 CCSB 4X4 ,Cat fuel filter delete with water seperator. Thuren suspension
    with Fox IFP shocks, thuren sway bar, rear track bar and front track bar, Warn 12k winch , custom winch mount, REVMAX trans pan,HD valve body and thermal bypas. Leer truck topper,Exotic head studs, Engine enhancements by the cummins whisper.

  12. Likes watersupply189 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •