Will the MM3 measure boost pressure?
If so, where?
2012 Ram 2500 Longhorn Mega Cab,MM3 programmer, AFE Blade runner intake elbow,5" SS Exhaust
Will the MM3 measure boost pressure?
If so, where?
2012 Ram 2500 Longhorn Mega Cab,MM3 programmer, AFE Blade runner intake elbow,5" SS Exhaust
2017 Laramie Longhorn 2500 Mega Cab
2003 SLT with a Smarty Tuner, Sinister Intake elbow, S&B Cold air intake
2008 Harley Davidson Custom Built Electraglide
2017 Jeep Rubicon 35 12.50 20 on Fuel Wheels, Locking front and rear diffs, disconnecting sway bar, 4 door hard top
Yes it does.
You have to go into the pressure option on the dashboard screen in the MM3.
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
Yeah, I found how to get into them by trial and error. So many things that can be changed I'm scared to mess with them.
I do wonder if my truck bucking and rpms bouncing could be corrected with timing, but I don't know where to begin
2012 Ram 2500 Longhorn Mega Cab,MM3 programmer, AFE Blade runner intake elbow,5" SS Exhaust
2017 Laramie Longhorn 2500 Mega Cab
2003 SLT with a Smarty Tuner, Sinister Intake elbow, S&B Cold air intake
2008 Harley Davidson Custom Built Electraglide
2017 Jeep Rubicon 35 12.50 20 on Fuel Wheels, Locking front and rear diffs, disconnecting sway bar, 4 door hard top
I had a max boost at 40 psi on lowest tune, is that normal?
2012 Ram 2500 Longhorn Mega Cab,MM3 programmer, AFE Blade runner intake elbow,5" SS Exhaust
2017 Laramie Longhorn 2500 Mega Cab
2003 SLT with a Smarty Tuner, Sinister Intake elbow, S&B Cold air intake
2008 Harley Davidson Custom Built Electraglide
2017 Jeep Rubicon 35 12.50 20 on Fuel Wheels, Locking front and rear diffs, disconnecting sway bar, 4 door hard top
Not usually, no, I think the highest I've seen is 37 or 38 psi, but really any thing at that or after that pressure is not very efficient from what I've heard, maybe someone else will chime in more on that.
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
Boost pressure is monitored by the MAP sensor which maxes out at 37-38 psi.
I have not heard of one reading beyond this.
The stock charger is only good/stays in the cool air MAP until about 32psi so anything more than that is asking for issues.
are you running stock VGT charger?
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Yes its stock.
2012 Ram 2500 Longhorn Mega Cab,MM3 programmer, AFE Blade runner intake elbow,5" SS Exhaust
2017 Laramie Longhorn 2500 Mega Cab
2003 SLT with a Smarty Tuner, Sinister Intake elbow, S&B Cold air intake
2008 Harley Davidson Custom Built Electraglide
2017 Jeep Rubicon 35 12.50 20 on Fuel Wheels, Locking front and rear diffs, disconnecting sway bar, 4 door hard top
Bookmarks