Thanks Thanks:  1
Likes Likes:  5
Results 1 to 3 of 3

Thread: MM3 Monitoring Question

  1. Top Of Page | #1
    northstarfire0693's Avatar

    User Info Menu

    MM3 Monitoring Question

    I still have my MM3 that was used on my old truck.

    I was wanting to use it for a monitor for now.

    When I plug it in to the new truck not all the gauges will work and some of the gauges that are on the device will not show up in the menu.

    Is there some step I am missing?

    What I am wanting to monitor is DPF % and EGT temps.

    2006 2500 QC Laramie 5.9 (Sold in 2016). 2017 3500 DRW CC Laramie, Loaded. MM3 tuned by DRD. 4" SS by Jamo. 68REF, 4.10 Rears. (Sold). 2018 3500 DRW Longhorn CC AISIN 4.10's. On a good health care plan by DRD.

  2. Likes AK Bob, watersupply189 liked this post
  3. Top Of Page | #2
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Re: MM3 Monitoring Question

    Just some of my thoughts.

    Your new truck has the Aisin transmission so you won’t have any of the transmission readings.

    You would need to have an EGT probe installed to display EGT’s.

    I would think the DPF% should work but perhaps it needs to be VIN enabled.

    Hopefully someone else will have better answers for you.


    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

    Sent from my iPad using Tapatalk

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  4. Thanks northstarfire0693 thanked for this post
    Likes watersupply189 liked this post
  5. Top Of Page | #3
    #1 VENDOR cumminsdieselfreak's Avatar

    User Info Menu

    Re: MM3 Monitoring Question

    Quote Originally Posted by AK Bob View Post
    Just some of my thoughts.

    Your new truck has the Aisin transmission so you won’t have any of the transmission readings.

    You would need to have an EGT probe installed to display EGT’s.

    I would think the DPF% should work but perhaps it needs to be VIN enabled.
    x2

    2018 Ram 2500 4x4 G56
    Romans 10:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    joe@ddpmotorsports.com
    www.ddpmotorsports.com


  6. Likes AK Bob, watersupply189 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •