I recently purchased a 2012 3500 not sure what all has been changed on it other than the obvious deletes.
I don’t think it’s a factory turbo on it but the only thing I can find stamped is 063G Borg Warner.
Thanks: 9
Likes: 28
I recently purchased a 2012 3500 not sure what all has been changed on it other than the obvious deletes.
I don’t think it’s a factory turbo on it but the only thing I can find stamped is 063G Borg Warner.
watersupply189 thanked for this post
Any pics?
If it says Borg Warner most likely not factory.
Do u have an exhaust brake function or functional.
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
watersupply189 liked this post
The truck has an exhaust brake button but it doesn’t seem to do anything
watersupply189 thanked for this post
watersupply189 liked this post
Yup that's an aftermarket turbo , so chances are u have no exhaust brake. Looks like an s300 frame mabye 63mm
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
Jones320 thanked for this post
watersupply189 liked this post
So it’s not a VGT turbo wouldn’t that require special tuning also?
watersupply189 liked this post
Right non VGT, as the tuning goes I'd say yes but I've heard people say they just swapped it out and ran it.
I'd definitely tune for it because you would get the most out of a slightly bigger turbo.
Plus no cel.
What about a picture looking at it from the top of the engine bay, exhaust manifold and all?
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
watersupply189 thanked for this post
watersupply189 liked this post
Sorry been busy I’ll get a better pic, it is an aftermarket manifold also, I don’t have CEL now i put a RaceME tuner on it already for the deletes
watersupply189 thanked for this post
watersupply189 liked this post
Here are a few pics
watersupply189 thanked for this post
watersupply189 liked this post
Well its got head studs that's a plus ,hopefully they installed them correctly or went back in for a re torque. Looks like a ATS 3 piece manifold, who knows what kit it actually is or just something someone pieced together. Also wonder if that's a fleece coolant bypass that's running along the head in the braided line , I cant tell if it goes behind the back of the head.
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
watersupply189 liked this post
Also it's a second gen swap setup.
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
watersupply189 liked this post
Posting Permissions
Register To Reply
Bookmarks