Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: using mm3 for trans pressure

  1. Top Of Page | #1
    Basic Member mud015's Avatar

    User Info Menu

    using mm3 for trans pressure

    Looking for anyone that has used a tuner for there transmission pressure gauge? I set my mm3 to the trans pressure pod and during a little miss hap earlier it showed a pressure of 263 psi. Now it is my understanding that the stock 68 rfe is not capable of making this kind of line pressure? is the mm3 reading the right pressure or is it reading something else? it is not stock I was told it has trans tunes in it. it reads 160 to 170 psi under normal driving. I have a manual gauge with adaptor on its way just killing time.


  2. Top Of Page | #2
    TH-64's Avatar

    User Info Menu

    Re: using mm3 for trans pressure

    It would need an upgraded valve body to reach that pressure. I have a RevMax in mine and my trans tuning is set to max out at 250 psi.

    Sent from my SM-G950U using Tapatalk

    2012 CCSB Saddle Brown Pearl... DRD tuned

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •