Thanks Thanks:  13
Likes Likes:  36
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Flatbed Correctiveness/Modification

  1. Top Of Page | #1
    klittle2222's Avatar

    User Info Menu

    Flatbed Correctiveness/Modification

    So when I bought this truck it already came with the flatbed.

    Had a aftermarket class IV reciever hitch and no spare.

    Automatically I knew I was gonna be installing the oem class V hitch. I did not want to alter it in any way due to if I come across a bed I can't refuse it would have the brackets and such such for the bumper. So I knew I needed to extend it.

    This bed was made for another vehicle. They don't manufacturer this kind anymore and the frame had been cut up a bit to fit around the shock mounts and leaf spring mounts.

    The weekend before doing the work I started measuring and low and behold! I honestly didn't even notice it the whole time, the gooseneck location was actually forward of the rear axle.

    So got some rough measurements and got some material.





  2. Thanks watersupply189 thanked for this post
  3. Top Of Page | #2
    klittle2222's Avatar

    User Info Menu

    Re: Flatbed Correctiveness/Modification

    The other weekend I started it, I wasn't able to finish but got it to a point to where it was drivable again. When I got it cut in half I got the reciever hitch installed first and went about getting the bed in line, gooseneck over the axle, filling in the cut outs on the bed frame and doing what I can with the time I had.

    Sent from my SM-N960U using Tapatalk


  4. Thanks watersupply189 thanked for this post
  5. Top Of Page | #3
    klittle2222's Avatar

    User Info Menu

    Re: Flatbed Correctiveness/Modification

    I bought some aftermarket body mount hardware that will secure it down and be good enough to allow the truck frame to flex like it should. I still need to get the bed completely off the truck and finish welding in areas on the frame, get it painted, then I'll get the wiring put back properly. More updates to come!

    Sent from my SM-N960U using Tapatalk


  6. Thanks watersupply189 thanked for this post
  7. Top Of Page | #4
    MOD watersupply189's Avatar

    User Info Menu

    Re: Flatbed Correctiveness/Modification

    Looks like a fun project friend. Can’t wait to see the end results


    2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  8. Thanks klittle2222 thanked for this post
    Likes Power247, timshooter40, klittle2222 liked this post
  9. Top Of Page | #5
    No Vacancy Power247's Avatar

    User Info Menu

    Re: Flatbed Correctiveness/Modification

    Nice work so far

    Greg
    2012 | RAM 2500 | CCSB | MM3 tuned by Double R Diesel
    2016 | Heartland Pioneer | DS310

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI

  10. Thanks klittle2222 thanked for this post
  11. Top Of Page | #6
    klittle2222's Avatar

    User Info Menu

    Re: Flatbed Correctiveness/Modification

    Quote Originally Posted by watersupply189 View Post
    Looks like a fun project friend. Can’t wait to see the end results


    2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
    When I'm done it'll look like it was made for the truck.

    I have been pondering on some skirting, maybe a toolbox on each side.

    So many options!

    Sent from my SM-N960U using Tapatalk


  12. Thanks watersupply189 thanked for this post
    Likes watersupply189, Power247 liked this post
  13. Top Of Page | #7
    MOD watersupply189's Avatar

    User Info Menu

    Re: Flatbed Correctiveness/Modification

    Quote Originally Posted by klittle2222 View Post
    When I'm done it'll look like it was made for the truck.

    I have been pondering on some skirting, maybe a toolbox on each side.

    So many options!

    Sent from my SM-N960U using Tapatalk
    Definitely standing by for pics as you progress!!!


    2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  14. Thanks klittle2222 thanked for this post
    Likes klittle2222 liked this post
  15. Top Of Page | #8
    klittle2222's Avatar

    User Info Menu

    Re: Flatbed Correctiveness/Modification

    Finally got the time to upload some progress I made during the holidays.

    Cut out, welded in some steel. Got the new mounts in.

    Even got a shot with the new B&W hitch too!

    I got the factory trailer plug I'm gonna cut in when I get the chance.

    Sent from my SM-N960U using Tapatalk



  16. Thanks watersupply189 thanked for this post
    Likes AK Bob, watersupply189, Mdavlee liked this post
  17. Top Of Page | #9
    klittle2222's Avatar

    User Info Menu

    Re: Flatbed Correctiveness/Modification

    UPDATE!!! Unfortunately, it has been a long while.

    Work tends to let time fly by.

    Since my last post, I got the bed finished up!

    All-new LED lights.

    While at the same time I did some upgrading with help from DRD.

    Definitely am happy the way the engine and transmission act now.





    Sent from my SM-N986U using Tapatalk


  18. Thanks watersupply189, IGOTACUMMINS thanked for this post
    Likes watersupply189, IGOTACUMMINS, Jess6.7 liked this post
  19. Top Of Page | #10
    MOD watersupply189's Avatar

    User Info Menu

    Re: Flatbed Correctiveness/Modification

    Quote Originally Posted by klittle2222 View Post
    UPDATE!!! Unfortunately, it has been a long while.

    Work tends to let time fly by.

    Since my last post, I got the bed finished up!

    All-new LED lights.

    While at the same time I did some upgrading with help from DRD.

    Definitely am happy the way the engine and transmission act now.





    Sent from my SM-N986U using Tapatalk
    Nice little flatbed!


    2016 Ram 3500 CC 4x4, G56, Dr. DRD medically cured!

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  20. Thanks klittle2222 thanked for this post
    Likes klittle2222 liked this post
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •