Thanks Thanks:  6
Likes Likes:  14
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Exhaust!! Err!!

  1. Top Of Page | #1
    Basic Member Iron's Avatar

    User Info Menu

    Question Exhaust!! Err!!

    Short story even shorter, I've decided I want to run a axle dump but I CAN'T STAND the idea of not running twins!

    I know it is utterly useless 'and laugh if you will I willn't take offense' but I cannot stand 1 exhaust...

    If anything it's for looks/sound?

    Is it possible/logical to run a duals like this?

    I haven't seen it done yet but I like the idea 'even if it is a waste of hard earned money' of doing this.

    I'll take cover now to avoid incoming food being thrown at me!

    - Iron


  2. Thanks watersupply189 thanked for this post
    Likes watersupply189, timshooter40 liked this post
  3. Top Of Page | #2
    MOD watersupply189's Avatar

    User Info Menu

    Re: Exhaust!! Err!!

    Quote Originally Posted by Iron View Post
    Short story even shorter, I've decided I want to run a axle dump but I CAN'T STAND the idea of not running twins!

    I know it is utterly useless 'and laugh if you will I willn't take offense' but I cannot stand 1 exhaust...

    If anything it's for looks/sound?

    Is it possible/logical to run a duals like this?

    I haven't seen it done yet but I like the idea 'even if it is a waste of hard earned money' of doing this.

    I'll take cover now to avoid incoming food being thrown at me!

    - Iron
    I like the thought of duals also but not an axle dump.

    You will get a lot of drone up in the cab and I couldn’t imagine what it would be like with duals. LOL


    2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  4. Top Of Page | #3
    Dwelsh's Avatar

    User Info Menu

    Re: Exhaust!! Err!!

    Quote Originally Posted by Iron View Post
    Short story even shorter, I've decided I want to run a axle dump but I CAN'T STAND the idea of not running twins!

    I know it is utterly useless 'and laugh if you will I willn't take offense' but I cannot stand 1 exhaust...

    If anything it's for looks/sound?

    Is it possible/logical to run a duals like this?

    I haven't seen it done yet but I like the idea 'even if it is a waste of hard earned money' of doing this.

    I'll take cover now to avoid incoming food being thrown at me!

    - Iron
    Pretty sure they make split rear dual kits. My buddy had one on his duramax

    2016 2500 slt. 4x4. 20x10 moto metal 970s on 305-55-20. Fully deleted with mm3. 5 inch tbe.

  5. Likes watersupply189 liked this post
  6. Top Of Page | #4
    CMB's Avatar

    User Info Menu

    Re: Exhaust!! Err!!

    How much black stuff will build up under the truck over the years?

    Now when I fetch the spare (or do anything else under there) end up looking like a chimney sweeper.

    2012 Ram 3500 Laramie, 3" BDS Coil over, DuraFlap, 68RFE, 4.10, 35s, Front receiver, Krown protected

  7. Thanks watersupply189 thanked for this post
    Likes watersupply189 liked this post
  8. Top Of Page | #5
    Basic Member Iron's Avatar

    User Info Menu

    Re: Exhaust!! Err!!

    Quote Originally Posted by CMB View Post
    How much black stuff will build up under the truck over the years?

    Now when I fetch the spare (or do anything else under there) end up looking like a chimney sweeper.
    Chimney sweeper hah!

    I don’t think you can keep spare tire when your running duel. I could be wrong.

    - Iron


  9. Likes watersupply189 liked this post
  10. Top Of Page | #6
    wy4x4's Avatar

    User Info Menu

    Re: Exhaust!! Err!!

    They make kits for dual outlets.

    But why, there is only one outlet upstream?

    This is not a V8 diesel!!

    Diesel Master Tech Certified - ICML Machinery Lube Certified

    2002 QCLB 2500 5.9 HO NV5600 =
    Ranch truck with CM Flatbed, DPS Exh/Int Manifolds, Boost Elbow
    2018 CCLB 2500 ST 6.7 G56 = Glacier intake manifold & horn, Flo-pro 4" SS, MM3 with DRD 30hp tune, Valair quiet dual disc clutch, Laramie 18's powder coated black and blackout badges

  11. Likes watersupply189 liked this post
  12. Top Of Page | #7
    ChrisOx's Avatar

    User Info Menu

    Re: Exhaust!! Err!!

    http://www.flopro.com/dsldodge1314.html

    Check here.

    They have a dual and I want it. LOL.

    I got 1 side exit now.

    I wonder if i can just get the 3 pc's I need?


  13. Thanks watersupply189 thanked for this post
    Likes watersupply189 liked this post
  14. Top Of Page | #8
    BlackBart's Avatar

    User Info Menu

    Re: Exhaust!! Err!!

    Quote Originally Posted by wy4x4 View Post
    They make kits for dual outlets.

    But why, there is only one outlet upstream?

    This is not a V8 diesel!!

    Hows about a V-12?




    Good stuff.... Truckers bring it

  15. Thanks watersupply189 thanked for this post
    Likes watersupply189, walla2k5 liked this post
  16. Top Of Page | #9
    Permanent Vacation 0rion's Avatar

    User Info Menu

    Re: Exhaust!! Err!!

    As with all mods....it's your truck. Do to it what makes you happy. You can get it split out back. I did 4" stainless duals on my last truck which was a Duramax. Wish I would've just went with a single 5" instead. I just think a single 5 sounds better. Either way I wouldn't dump it. Not sure how old you are or what you use the truck for but at 49 I see no way I'd dump under and haul our 5er 12 hours on vacation. When I was younger the louder the better but these days I search for just loud enough. Currently have an mbrp catback and last weekend took the cat off. Seems to be just the right amount of loud for me...wouldn't want it dumped either though.


  17. Likes watersupply189 liked this post
  18. Top Of Page | #10
    walla2k5's Avatar

    User Info Menu

    Re: Exhaust!! Err!!

    Quote Originally Posted by BlackBart View Post

    Hows about a V-12?


    The buzzing dozen!

    2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm

  19. Thanks BlackBart thanked for this post
    Likes watersupply189 liked this post
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •