Thanks Thanks:  5
Likes Likes:  7
Results 1 to 3 of 3

Thread: Front Driveshaft Rebuild

  1. Top Of Page | #1
    OneTon's Avatar

    User Info Menu

    Front Driveshaft Rebuild

    Hi everybody.

    I'm in the process of rebuilding my front shaft.

    I'm having a hard time finding a ball kit for the double cardan joint.

    Does anyone have part numbers or know where I could find one?

    2015 3500.

    2015 Ram 3500 CCSB SRW 4x4 G56
    2020 Ram 2500 CCSB 4x4 68RFE

    Never ending project. Always adding something...

  2. Thanks watersupply189 thanked for this post
    Likes watersupply189 liked this post
  3. Top Of Page | #2
    InlineSix.7's Avatar

    User Info Menu

    Re: Front Driveshaft Rebuild

    I just had a front driveshaft built by Driveshaft Specialists in Texas and they only use Spicer and Mopar parts.

    You might be able to buy the OEM ball kit from them.


    Sent from my iPhone using Tapatalk

    2012 Ram 2500 Laramie 4x4 Crew Cab 6.7 Cummins. RevMax built 68RFE "550" transmission w/ billet flexplate/low stall triple disc TC/direct oiling billet input shaft. 35"x12.50" Toyo Open Country AT2 tires on OEM 20" wheels, Thuren soft ride front springs, Thuren track bar, Thuren upper and lower control arms, Hellbent steering box brace, King 2.0 steering damper, Redhead steering box, Fox 2.0 shocks, Carli ball joints, Caterpillar fuel filter/Donaldson water separator, ARP 425 head studs, Viair onboard air compressor, airlift 5k# rear airbags, V4 LED headlights, Kenwood head unit

  4. Thanks watersupply189 thanked for this post
    Likes watersupply189, AK Bob liked this post
  5. Top Of Page | #3
    OneTon's Avatar

    User Info Menu

    Re: Front Driveshaft Rebuild

    Quote Originally Posted by OneTon View Post
    Hi everybody.

    I'm in the process of rebuilding my front shaft.

    I'm having a hard time finding a ball kit for the double cardan joint.

    Does anyone have part numbers or know where I could find one?

    2015 3500.
    Finally got around to fixing this thing.

    Ended up getting my parts at Napa:
    Ball Kit - UJ617
    U Joints - UJ330

    Quite the job getting the old joints out thanks to winter road chemicals.

    Getting it back together was a snap.

    So nice to have 4x4 working again.

    2015 Ram 3500 CCSB SRW 4x4 G56
    2020 Ram 2500 CCSB 4x4 68RFE

    Never ending project. Always adding something...

  6. Thanks IGOTACUMMINS, watersupply189, AK Bob thanked for this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •