Control module mounting locations

[Mac H]

Just getting started on my MM3 tuner.

I was under the dash looking for a place to mount my control module when I mount permanently after testing.

There is a relatively above the emergency brake assembly. The emergency brake assembly would have to be removed yo access and it would still be a ***** to mount. Under the left hand kick panel might have enough room to mount the module under it.

Where and how have more experienced members mounted your modules?

Thanks,
Mac H

 0 Comment(s)

[watersupply189]

I mounted mine inside the dash next to the door.

I removed the plastic cover and used zip ties to hold it in place.




2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

 1 Comment(s)

Mac H Looks a hellava lot easier than the places I was looking at

12-01-2019

[AK Bob]

Just zip tied mine to a wiring harness up under the dash.

My main consideration was the length of wire going to the EGT probe.


2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

Sent from my iPad using Tapatalk

 0 Comment(s)