Good morning everyone, I have the pusher delete kit, and I have cut the riser line.
However, I cannot get the oring to seat in this line.
I have torn up 3 orings in the process.
Please help!
Thank you!
2014 RAM 3500 SRW 6.7 Cummins.
Good morning everyone, I have the pusher delete kit, and I have cut the riser line.
However, I cannot get the oring to seat in this line.
I have torn up 3 orings in the process.
Please help!
Thank you!
2014 RAM 3500 SRW 6.7 Cummins.
@tmaness9
It's a holiday weekend, hang in there, someone who's done this should be on soon.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
I had to use oil to help mine.
If that still doesn't work, put the part inside the tube in the freezer for a while; it will shrink ever so slightly.
I got it to go into the tube.
After re-installation, it has a small leak out of the set screw hole.
Any idea what may have caused that or a solution?
Not sure if I can RTV up the set screw and wet install it.
You may have damaged the O ring.
I would give that a try or a couple of wraps of Teflon tape on the set screw.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.
Sent from my iPhone using Tapatalk
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
X2 on this Teflon tape, I would only use blue Monster Teflon tape.
2016 Ram 2500 CCSB 4X4 ,Cat fuel filter delete with water seperator. Thuren suspension
with Fox IFP shocks, thuren sway bar, rear track bar and front track bar, Warn 12k winch , custom winch mount, REVMAX trans pan,HD valve body and thermal bypas. Leer truck topper,Exotic head studs, Engine enhancements by the cummins whisper.
I don’t know if this is too old, but I just had today's exact problem.
I messed up three o rings, and I still am not comfortable with the one I will install tomorrow.
I even heated the riser pipe to see if I could get it to expand to put the fitting in.
Bookmarks