2019 Cummins Loud Tapping Noise

[cumminsturbofreak]

I’m not sure but I’ll look tomorrow and see , I know it sucked and even worse when I walked in the shop and the cab is in the air and the kid working on it says “I’m sorry it’s taken so long , they should have given it to the actual diesel mechanic here . This is my first time working on a diesel much less doing something like this but I’ll get it eventually” word for word that’s what he told me

Ok, well my build date is 4-19

If yours is the same, there may be a tsb or recall coming.

 0 Comment(s)

[Jfaught13]

Ok, well my build date is 4-19

If yours is the same, there may be a tsb or recall coming.

Mine is 3-19 , has anyone else been posting on here about this problem ? I haven’t really looked around on the forum yet

 0 Comment(s)

[cumminsturbofreak]

Mine is 3-19 , has anyone else been posting on here about this problem ? I haven’t really looked around on the forum yet

I haven't heard too many issues with other guys...

Which leads me to believe there was a bad batch around March-April 2019.

 0 Comment(s)

[cumminsturbofreak]

So, I got everything ordered today.

I will post when I receive it.

DE36C36C-DD13-4675-ACCD-CF5623547EB6.jpg

 0 Comment(s)

[cumminsturbofreak]

Just got an email.

Now it's in D1 status

 0 Comment(s)

[wy4x4]

Mine took 6 months so don't get too excited. New holland blue custom color was the hang up and the last of the G56 trucks as well. When trying to locate my truck during build I dealt with many of the same issues you have with FCA. Actually canceled the order, and the truck arrived 2 months later at the dealer anyways. Then after lengthy negotiations we made a deal and I ended up with the truck. Personally I would have gone with a 2018 and down for now, give the new trucks more time and see where it goes. But more than likely you just got a lemon, seems it is happening more and more to people lately.

 0 Comment(s)

[cumminsturbofreak]

Mine took 6 months so don't get too excited. New holland blue custom color was the hang up and the last of the G56 trucks as well. When trying to locate my truck during build I dealt with many of the same issues you have with FCA. Actually canceled the order, and the truck arrived 2 months later at the dealer anyways. Then after lengthy negotiations we made a deal and I ended up with the truck. Personally I would have gone with a 2018 and down for now, give the new trucks more time and see where it goes. But more than likely you just got a lemon, seems it is happening more and more to people lately.

Tried to go with 2018, but they all sold.

Then I put in an order for a new one, and now the plant is shuttered because of the Chinese Virus.

 0 Comment(s)

[watersupply189]

Tried to go with 2018, but they all sold.

Then I put in an order for a new one, and now the plant is shuttered because of the Chinese Virus.

Dang if it wasn’t for bad luck, you would have no luck at all!

Hopefully they will start back up soon.


2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

 0 Comment(s)

[cumminsturbofreak]

So, no word when it will be built, but I hear the plant will start back up soon.

I did finally get my VIN today if that means anything.

It is 19xxxx VIN so it will probably be one of the first off the line.

Once there is a winder sticker, then it will have been built.

 0 Comment(s)

[RamIt]

So, no word when it will be built, but I hear the plant will start back up soon.

I did finally get my VIN today if that means anything.

It is 19xxxx VIN so it will probably be one of the first off the line.

Once there is a winder sticker, then it will have been built.

Send me your VON or last 8 in PM and I can pull the status for you.

 0 Comment(s)