Anybody here with a manual tranny make the swap to a solid mass flywheel?
What are your experiences?
Thanks: 6
Likes: 14
Anybody here with a manual tranny make the swap to a solid mass flywheel?
What are your experiences?
I had a solid already in my 03 when I had to replace my clutch but I have no complaints, single disc nv5600Originally Posted by BlackBart
Sent from my SM-G930U using Tapatalk
BlackBart thanked for this post
watersupply189 liked this post
i swapped a smf into my G56 earlier this year with a dual disc clutch. Its pretty noisy below 1500 RPM especially in 4th and 5th. Haven't tried any different fluids yet tho. Other than that its fine.
Dayum. I thought them dually discs were supposed to be the answer to that gear rollover noise.
I don't think it really matters what clutch you go with as far as gear rollover. The flywheel is what makes it happen. I've been told that something like a mobil delvac 50 gear oil will eliminate 80-90% of it.
BlackBart thanked for this post
I just got done watchin a fella on youtube singin the praises of the south bend dual disk clutch. Is that what you used?
watersupply189 liked this post
You cant go wrong with south bend or valair as long as you get the street/quiet one.
watersupply189 liked this post
I ran a fluid damper on a 12 valve and 07 5.9 with dual disc clutches that weren’t the newer diaphragm street clutches.
It helped smooth out the idle and quite then down a touch.
They still make a good bit of noise no matter what.
Posting Permissions
Register To Reply
Bookmarks