Intake Horn Banks A "Hole"

[flanagan]

That's indeed where the access hole but the access hole is smaller than the BD heater, and at that time, Banks were not offering the heater as they do now.

Sent from my SM-G973U using Tapatalk

 0 Comment(s)

[toyota_mdt_tech]

22mm X 1.5 thread pitch.

Standard Motor Products' part number is DIH4 for the heater element.

https://m.media-amazon.com/images/I/...AC_SL1500_.jpg

I suppose anyone could just remove the stock air horn, TIG in a nice bung, and add this into the air horn (heater coil) and, remove the wire from the stock grid heater, move over to this unit.

Be a low-cost fix to avoid ingesting the terminal bolt into cylinder 6.

 0 Comment(s)

[toyota_mdt_tech]

That's indeed where the access hole but the access hole is smaller than the BD heater, and at that time, Banks were not offering the heater as they do now.

Sent from my SM-G973U using Tapatalk

OK, good info.

It looks like you got it covered.

 0 Comment(s)