Does the intake horns from an 18 work on the 19 or 20?
Looking at buying 2020, of course, they did make an intake horn for them yet.
Does the intake horns from an 18 work on the 19 or 20?
Looking at buying 2020, of course, they did make an intake horn for them yet.
You did a good job!
I have the Banks and Love it.
I posted somewhere on another post here after working 13 Hours 17 below.
The truck sitting outside is not plugged in.
I went to remote start the truck, and the batteries were dead got a jump from my buddy.
The truck started right up, stumbled for a few seconds, and smoked for a few minutes, but the heater did keep the truck running well.
Sent from my SM-G973U using Tapatalk
I feel you; it was just freezing a couple of weeks ago in Michigan, and I would start my Dually up, and it would chug a little, but it always started and smoothed out after 2-3 minutes too.
Thx for the pictures, I am thinking of doing the same.
What size drill and tap did you use?
2016 Dodge Ram 3500,Smittybilt M1 bumper, turbo back exhaust, ARP HEAD STUDS, BD Diesel ProTect68 68RFE Gasket Plate Kit and BD deep trans pan, SCREAMER HE300VG Turbo, BD Diesel Exhaust Manifold, Monster-Ram® Intake System 3.5-inch, Banks Air filter, BD Grid heater delete, RaceMe Ultra, tunes supplied by DRD.
Yes, it does, I bought the RAM horn from the guys at DDP, and everything fits up the same.
The only difference is the 1# fuel line but everything bolts.
Does anyone know the answer?
What size drill and tap?
Sent from my iPhone using Tapatalk
Drilled?
That is where it is supposed to go (heater) and doubles as an access hole to get the middle horn bolt in.
Use Loctite blue on all your horn bolts.
You will need to replace your #1 injector line too.
2010 Dodge 2500 SLT CCLB 4WD G56 Cummins 6.7 turbo diesel, 3.42 LSD. Add ons: Banks Monster Ram, Grid heater delete, Spyntec Free Spin Kit with Warn hubs (62672) Laramie Alloys (includes spare), "Powerwagon" Flares, Powerwagon bed decal (4X4 off road) OE Ram mudflaps, OE Slush Mats, OE Clearance Lamps, Geno's shift knob in black, 5" DPF back with muffler delete, spray in bedliner, OE brake controller, Durafit Seat Covers, Pro Tech Toolbox, Speed Turtle, Upfitter switches, Ham Radios, 8 Antennas, headache rack, emergency light bar,....
Unfortunately, the older Banks intake horns were not pre-drilled and taped for the screw-in grid heaters.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
22mm X 1.5 thread pitch.
Standard Motor Products' part number is DIH4 for the heater element.
2010 Dodge 2500 SLT CCLB 4WD G56 Cummins 6.7 turbo diesel, 3.42 LSD. Add ons: Banks Monster Ram, Grid heater delete, Spyntec Free Spin Kit with Warn hubs (62672) Laramie Alloys (includes spare), "Powerwagon" Flares, Powerwagon bed decal (4X4 off road) OE Ram mudflaps, OE Slush Mats, OE Clearance Lamps, Geno's shift knob in black, 5" DPF back with muffler delete, spray in bedliner, OE brake controller, Durafit Seat Covers, Pro Tech Toolbox, Speed Turtle, Upfitter switches, Ham Radios, 8 Antennas, headache rack, emergency light bar,....
Bookmarks