Thanks Thanks:  0
Likes Likes:  3
Results 1 to 3 of 3

Thread: Best Turbo Boost

  1. Top Of Page | #1
    Basic Member Last 5.9's Avatar

    User Info Menu

    Best Turbo Boost



    Time to change my long overdue Wastegate controller solenoid now what is best for my engine?

    I'm thinking about plugging it off with some aftermarket plug that won't shut off my pressure in the hose controlling the wastegate position then adding a new aftermarket wastegate controller set to 40 psi and putting a wastegate solenoid resistor on the plug end to stop any codes I may get from unplugging this rusty mess.


  2. Likes watersupply189 liked this post
  3. Top Of Page | #2
    Basic Member Last 5.9's Avatar

    User Info Menu

    Re: Best Turbo Boost

    So I ended up using a DeeWorks plug with 3 O rings removing the smallest out on the end so I could use my stock wastegate hose connection and a AFE Bladerunner wastegate controller set at 40 psi. Works great!


  4. Likes watersupply189 liked this post
  5. Top Of Page | #3
    Basic Member Last 5.9's Avatar

    User Info Menu

    Re: Best Turbo Boost

    Also I forgot to mention I had to plug in a ATS wastegate solenoid harness jumper to my wire that was plugged into the original (rusty) factory solenoid.


  6. Likes watersupply189 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •