Thanks Thanks:  0
Likes Likes:  3
Results 1 to 2 of 2

Thread: Testing after Tuning

  1. Top Of Page | #1
    Ddixon1993's Avatar

    User Info Menu

    Testing after Tuning

    Hey guys,

    After the tuning is complete with the MM3, is there a method to test out if everything is performing correctly?

    Once the tuning is uploaded do you just pull a couple plugs off the stock pipe and restart the truck to make sure there are no CEL's?

    Sent from my SM-N960U using Tapatalk


  2. Likes watersupply189, Power247 liked this post
  3. Top Of Page | #2
    No Vacancy Power247's Avatar

    User Info Menu

    Re: Testing after Tuning

    Quote Originally Posted by Ddixon1993 View Post
    Hey guys,

    After the tuning is complete with the MM3, is there a method to test out if everything is performing correctly?

    Once the tuning is uploaded do you just pull a couple plugs off the stock pipe and restart the truck to make sure there are no CEL's?

    Sent from my SM-N960U using Tapatalk
    Yes, disconnect as many connectors as you can easily reach (like the EGR) and go for a drive. But really, if the tuner says the tune is successfully installed then you are good to go with removing hard parts.

    Greg
    2012 | RAM 2500 | CCSB | MM3 tuned by Double R Diesel
    2016 | Heartland Pioneer | DS310

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI

  4. Likes watersupply189 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •