Screenshot_20191105-161534_Google.jpg
It's your lucky day.....
18 ft/lbs and the tightening order is above.
Screenshot_20191105-161534_Google.jpg
It's your lucky day.....
18 ft/lbs and the tightening order is above.
2012 Ram 3500 Laramie, 3" BDS Coil over, DuraFlap, 68RFE, 4.10, 35s, Front receiver, Krown protected
Thanks CMB. I'm going to drain the oil tomorrow and let stand for a day or two. Will start the removal by the end of the week. Hopefully the oil pan will release from the block easily without prying.
Could be the oil filter, You have to be sure the old o-ring came out when you changed it. Look at the oil cooler and the turbo oil lines too
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
The problem I have is it appears it started to leak after the oil change
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Not the oil filter, look at the pictures.
The oil filter is on the drivers side, leak is on the curb side.
Oil filter has no oil around it. 12,000 miles on this oil filter without leaking.
OK, I got the oil pan off and am cleaning both mating surfaces. The new gasket has blue lines around all the bolt holes, it maybe some sort of adhesive. Anybody know which side of the engine this side of the gasket goes on - block or oil pan. What kind of gasket sealer do you guys recommend. The attachment CMB posted listed Three Bond Sealant but there are several Three Bond Sealants.
Three Bond 1184ATB000/BCL- 1184 Gray Liquid Gasket - 100g.
1184 has a wide temp range and tolerates oil well. I little goes a long way.
Can you post a picture of the pan mating surface and bolt hole. Im just looking at the way the metal is formed.
Cheers
2012 Ram 3500 Laramie, 3" BDS Coil over, DuraFlap, 68RFE, 4.10, 35s, Front receiver, Krown protected
Bookmarks