How difficult is it to change the serpentine belt?
I'm going to need to do it soon, is there anything I should watch out for?
Thanks everyone!
How difficult is it to change the serpentine belt?
I'm going to need to do it soon, is there anything I should watch out for?
Thanks everyone!
2012 Ram 3500 Laramie, 3" BDS Coil over, DuraFlap, 68RFE, 4.10, 35s, Front receiver, Krown protected
YouTube has some info.
https://www.youtube.com/watch?v=o8UQZq3Muaw
Diesel Master Tech Certified - ICML Machinery Lube Certified
2002 QCLB 2500 5.9 HO NV5600 = Ranch truck with CM Flatbed, DPS Exh/Int Manifolds, Boost Elbow
2018 CCLB 2500 ST 6.7 G56 = Glacier intake manifold & horn, Flo-pro 4" SS, MM3 with DRD 30hp tune, Valair quiet dual disc clutch, Laramie 18's powder coated black and blackout badges
Be patient, have a long 1/2” breaker bar for the tensioner, and if I recall correctly the balancer pulley is very close to the ac compressor pulley and you have to (carefully) jam the belt in there somewhere. Have a screenshot pulled up of the belt routing to reference and you should get er done.
Sent from my iPhone using Tapatalk
2012 Ram 2500 Laramie 4x4 Crew Cab 6.7 Cummins. RevMax built 68RFE "550" transmission w/ billet flexplate/low stall triple disc TC/direct oiling billet input shaft. 35"x12.50" Toyo Open Country AT2 tires on OEM 20" wheels, Thuren soft ride front springs, Thuren track bar, Thuren upper and lower control arms, Hellbent steering box brace, King 2.0 steering damper, Redhead steering box, Fox 2.0 shocks, Carli ball joints, Caterpillar fuel filter/Donaldson water separator, ARP 425 head studs, Viair onboard air compressor, airlift 5k# rear airbags, V4 LED headlights, Kenwood head unit
Belt_routing.jpg
Found the routing diagram.
Remove the fan and shroud or not?? HMM.
2012 Ram 3500 Laramie, 3" BDS Coil over, DuraFlap, 68RFE, 4.10, 35s, Front receiver, Krown protected
Not necessary if just doing the belt
It's not bad, if you can have someone that knows the concept help you or hold the breaker bar for the tensioner it'll go quickly. As stated, just be patient.
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
Thanks all, greatly appreciate!
2012 Ram 3500 Laramie, 3" BDS Coil over, DuraFlap, 68RFE, 4.10, 35s, Front receiver, Krown protected
Bookmarks