Thanks Thanks:  7
Likes Likes:  12
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: RaceME Ultra Install Confusion

  1. Top Of Page | #11
    Permanent Vacation cumminsturbofreak's Avatar

    User Info Menu

    Re: RaceME Ultra Install Confusion

    Don't know if anyone got the memo, but when a Smarty Touch, MM3, or Raceme Ultra uses up all 4 VIN slots, it effectively becomes a paperweight...


  2. Top Of Page | #12
    That_guy's Avatar

    User Info Menu

    Re: RaceME Ultra Install Confusion

    Quote Originally Posted by cumminsturbofreak View Post
    Don't know if anyone got the memo, but when a Smarty Touch, MM3, or Raceme Ultra uses up all 4 VIN slots, it effectively becomes a paperweight...
    Regarding RaceME.

    I bought one used off of eBay with all 4 VIN slots used and it was bricked, but, you can go to Raceme's website and buy for $150.00 another VIN.
    https://racemeofficial.com/shop/tune...n-key-one-key/

    You get what you INSPECT, not what you EXPECT.

  3. Thanks Power247, NateB2316 thanked for this post
    Likes Power247, NateB2316 liked this post
  4. Top Of Page | #13
    Permanent Vacation cumminsturbofreak's Avatar

    User Info Menu

    Re: RaceME Ultra Install Confusion

    Quote Originally Posted by That_guy View Post
    Regarding RaceME.

    I bought one used off of eBay with all 4 VIN slots used and it was bricked, but, you can go to Raceme's website and buy for $150.00 another VIN.
    https://racemeofficial.com/shop/tune...n-key-one-key/
    https://racemecanada.com/product/vin-license/

    Each raceme comes with 1 license.

    You can buy three more licenses for a total of 4.

    After 4 licenses are used, the raceme cannot install on anymore trucks.


  5. Likes AK Bob liked this post
  6. Top Of Page | #14
    NateB2316's Avatar

    User Info Menu

    Re: RaceME Ultra Install Confusion

    Wow who would have figured? That is good to know in the future. Would like to upgrade to the AEV suspension, fenders and front bumper. Not totally sure about the 40" tires though.

    As for my questions, I did the initial tune and wrote to Michael at RaceMe, I went ahead and started to take everything off. Did the EGR valve, throttle valve, and the junk underneath. Put a 5" Flo Pro with muffler on, started it up and everything worked fine. Michael got back to me and said that the new software pegs the DEF Gauge to full and gives no secondary messages on the truck side. I did notice some crazy (not normal) vibration in drive while at idle. Turned out the down pipe was butted up against the frame of the truck. Everything is super smooth now. Put the basic tune on and will mess with the others in time, so far so good.


  7. Top Of Page | #15
    NateB2316's Avatar

    User Info Menu

    Re: RaceME Ultra Install Confusion

    Thanks Bob, I was able to do the same.


Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •