Don't know if anyone got the memo, but when a Smarty Touch, MM3, or Raceme Ultra uses up all 4 VIN slots, it effectively becomes a paperweight...
Don't know if anyone got the memo, but when a Smarty Touch, MM3, or Raceme Ultra uses up all 4 VIN slots, it effectively becomes a paperweight...
Regarding RaceME.
I bought one used off of eBay with all 4 VIN slots used and it was bricked, but, you can go to Raceme's website and buy for $150.00 another VIN.
https://racemeofficial.com/shop/tune...n-key-one-key/
You get what you INSPECT, not what you EXPECT.
https://racemecanada.com/product/vin-license/
Each raceme comes with 1 license.
You can buy three more licenses for a total of 4.
After 4 licenses are used, the raceme cannot install on anymore trucks.
Wow who would have figured? That is good to know in the future. Would like to upgrade to the AEV suspension, fenders and front bumper. Not totally sure about the 40" tires though.
As for my questions, I did the initial tune and wrote to Michael at RaceMe, I went ahead and started to take everything off. Did the EGR valve, throttle valve, and the junk underneath. Put a 5" Flo Pro with muffler on, started it up and everything worked fine. Michael got back to me and said that the new software pegs the DEF Gauge to full and gives no secondary messages on the truck side. I did notice some crazy (not normal) vibration in drive while at idle. Turned out the down pipe was butted up against the frame of the truck. Everything is super smooth now. Put the basic tune on and will mess with the others in time, so far so good.
Thanks Bob, I was able to do the same.
Bookmarks