Thanks Thanks:  31
Likes Likes:  74
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 38

Thread: CAT Fuel Filter and Stock filter delete questions

  1. Top Of Page | #1
    ultrarnr89's Avatar

    User Info Menu

    CAT Fuel Filter and Stock filter delete questions

    So perhaps I'm overthinking this a bit, but I don't want to end up ordering something and find out later I screwed the pooch.

    '16 3500 DRW needs the fuel filter changed. I'm appalled at the cost for the Mopar/ Fleetguard replacements. Hence my search leading to CAT filters. Has anyone had any success or significant issues with deleting the stock unit (either with the Fleece unit, or the dieselfuelkits unit) and running ONLY the CAT 2um filter (or Baldwin/ Donaldson)? I'm running the stock lift pump at present. Don't plan to change that unit out for at least a year or two. Will be deleting the truck this winter, but no plans for big power, other than cleaning up engine bay and promoting a healthier motor/ longevity.

    I've searched through 4-5 different forums at this point, and everything I'm finding with answers relating to the 5.9 or the pre '13 trucks with no rear chassis mounted f/w separator units.

    This is the kit I'm looking at purchasing, but I don't want to throw money away if I don't need to.

    http://www.dieselfuelfilterkits.com/...ilter_kit.html

    Advice?


  2. Thanks IGOTACUMMINS, watersupply189 thanked for this post
  3. Top Of Page | #2
    timshooter40's Avatar

    User Info Menu

    Re: CAT Fuel Filter and Stock filter delete questions

    I have been looking at the same thing. Cat fuel filter delete. I bought fuel filters and water fuel separator off ebay because of the price ,they said they were of equal or better quality. I put them up against the Mopar filter I had on hand and they looked the same and felt the same. I currious to what you found out? Or if you have done it?.


  4. Likes watersupply189 liked this post
  5. Top Of Page | #3
    Old... But Still Here! AnOldBiker's Avatar

    User Info Menu

    Re: CAT Fuel Filter and Stock filter delete questions

    Cat has a great reputation for quality products. Only down fall is hunting to find cheap prices. Many have sworn by them. I use Donaldson, but if the Cat prices were cheaper, I'd through them on too.

    Using a satellite filter unit has no issues if installed properly. A major plus is you can install making it easier to switch filters out.

    Or you could use the Donaldson replacement for the Cat instead at a cheaper price: $8.60.
    I buy many filters from them. https://www.filterspro.com/DONALDSON...p_1005499.html



    Jim


    2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17

    "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan

  6. Thanks watersupply189, timshooter40 thanked for this post
    Likes watersupply189, timshooter40 liked this post
  7. Top Of Page | #4
    MC250r719's Avatar

    User Info Menu

    Re: CAT Fuel Filter and Stock filter delete questions

    Quote Originally Posted by ultrarnr89 View Post
    So perhaps I'm overthinking this a bit, but I don't want to end up ordering something and find out later I screwed the pooch.

    '16 3500 DRW needs the fuel filter changed. I'm appalled at the cost for the Mopar/ Fleetguard replacements. Hence my search leading to CAT filters. Has anyone had any success or significant issues with deleting the stock unit (either with the Fleece unit, or the dieselfuelkits unit) and running ONLY the CAT 2um filter (or Baldwin/ Donaldson)? I'm running the stock lift pump at present. Don't plan to change that unit out for at least a year or two. Will be deleting the truck this winter, but no plans for big power, other than cleaning up engine bay and promoting a healthier motor/ longevity.

    I've searched through 4-5 different forums at this point, and everything I'm finding with answers relating to the 5.9 or the pre '13 trucks with no rear chassis mounted f/w separator units.

    This is the kit I'm looking at purchasing, but I don't want to throw money away if I don't need to.

    http://www.dieselfuelfilterkits.com/...ilter_kit.html

    Advice?
    Are trying to eliminate one of the filters completely?

    I have the Black Market Performance fuel filter and fuel water separator adapter kits installed on my truck so I can run a CAT fuel filter up front (takes the place of the factory cartridge filter) and a CAT water fuel separator in the back (takes the place of the factory water fuel separator)





    2017 RAM 2500 Big Horn sport appearance package, Auto Level Rear Suspension, MM3 "switch" Fully deleted - tuned by DRD, Fleece Cheetah, Airaid Jr. CAI, 3.5" Banks Monster intake horn, Pusher Boost Tubes, 5" TBE with a Flo~Pro Twister muffler, *** EGR disappear kit, Black Market Performance CAT fuel filter and water separator, Black Market Performance fuel heater, Black Market Performance head studs, AFE deep trans pan, Revmax trans cooler bypass, Revmax HD Valve Body, DPC Low stall converter with billet flywheel, AFE pro series rear diff cover, Amsoil throughout provided by mcsynthetics.myamsoil.com

  8. Thanks Power247, watersupply189, timshooter40 thanked for this post
  9. Top Of Page | #5
    MOD watersupply189's Avatar

    User Info Menu

    Re: CAT Fuel Filter and Stock filter delete questions

    Quote Originally Posted by MC250r719 View Post
    Are trying to eliminate one of the filters completely?

    I have the Black Market Performance fuel filter and fuel water separator adapter kits installed on my truck so I can run a CAT fuel filter up front (takes the place of the factory cartridge filter) and a CAT water fuel separator in the back (takes the place of the factory water fuel separator)



    I like that!! Do you have a part number link to this? Thanks


    2016 Ram Laramie 3500, G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

    2016 RAM 3500 4x4 Laramie Crew Cab
    Cummins,G56, Rough Country level, Morimoto LED fog lights, LED headlights, Lund Attitude Steps sprayed with Line-X, DRL's Activated, 35x12.50R18 Falken Wildpeak ATW3, Fuel Vapor Wheels Matte Black w/Dark Tint, A.R.E. Truck cap and swing boxes

  10. Likes timshooter40 liked this post
  11. Top Of Page | #6
    MC250r719's Avatar

    User Info Menu

    Re: CAT Fuel Filter and Stock filter delete questions

    Quote Originally Posted by watersupply189 View Post
    I like that!! Do you have a part number link to this? Thanks


    2016 Ram Laramie 3500, G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
    https://blackmarketperformance.com/c...-adapter-07-18
    https://blackmarketperformance.com/c...-adapter-13-18

    2017 RAM 2500 Big Horn sport appearance package, Auto Level Rear Suspension, MM3 "switch" Fully deleted - tuned by DRD, Fleece Cheetah, Airaid Jr. CAI, 3.5" Banks Monster intake horn, Pusher Boost Tubes, 5" TBE with a Flo~Pro Twister muffler, *** EGR disappear kit, Black Market Performance CAT fuel filter and water separator, Black Market Performance fuel heater, Black Market Performance head studs, AFE deep trans pan, Revmax trans cooler bypass, Revmax HD Valve Body, DPC Low stall converter with billet flywheel, AFE pro series rear diff cover, Amsoil throughout provided by mcsynthetics.myamsoil.com

  12. Thanks watersupply189 thanked for this post
  13. Top Of Page | #7
    MOD watersupply189's Avatar

    User Info Menu

    Re: CAT Fuel Filter and Stock filter delete questions

    Your the man!!

    Thank you sir


    2016 Ram Laramie 3500, G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

    2016 RAM 3500 4x4 Laramie Crew Cab
    Cummins,G56, Rough Country level, Morimoto LED fog lights, LED headlights, Lund Attitude Steps sprayed with Line-X, DRL's Activated, 35x12.50R18 Falken Wildpeak ATW3, Fuel Vapor Wheels Matte Black w/Dark Tint, A.R.E. Truck cap and swing boxes

  14. Top Of Page | #8
    timshooter40's Avatar

    User Info Menu

    Re: CAT Fuel Filter and Stock filter delete questions

    Quote Originally Posted by MC250r719 View Post
    Are trying to eliminate one of the filters completely?

    I have the Black Market Performance fuel filter and fuel water separator adapter kits installed on my truck so I can run a CAT fuel filter upfront (takes the place of the factory cartridge filter) and a CAT water fuel separator in the back (takes the place of the factory water fuel separator)



    I'm trying to cut costs on filters they are ridiculous prices. I have been reading on here about people complaining about the cost of filters and what filter to run, also that the stock filters don't have good filtration.

    I figured I would upgrade the fuel system with cat filters and water separator and delete the one on the side of the engine.


  15. Likes watersupply189 liked this post
  16. Top Of Page | #9
    timshooter40's Avatar

    User Info Menu

    Re: CAT Fuel Filter and Stock filter delete questions

    Quote Originally Posted by MC250r719 View Post
    Are trying to eliminate one of the filters completely?

    I have the Black Market Performance fuel filter and fuel water separator adapter kits installed on my truck so I can run a CAT fuel filter up front (takes the place of the factory cartridge filter) and a CAT water fuel separator in the back (takes the place of the factory water fuel separator)



    According to your avatar, you have a 2017

    I have a 2016. I like the filter set up you have I was looking at the same thing but just putting both filters in the rear of the truck.

    How did you get the water fuel separator filter to work? In other words, my question is how did you make it work without the wire plug in the bottom of the filter so that it did not throw codes (check engine light)?


  17. Likes watersupply189 liked this post
  18. Top Of Page | #10
    MC250r719's Avatar

    User Info Menu

    Re: CAT Fuel Filter and Stock filter delete questions

    Quote Originally Posted by timshooter40 View Post
    According to your avatar you have a 2017
    I have a 2016. I like the filter set up you have I was looking at same thing but just putting both filters in rear of truck. How did you get the water fuel separator filter to work . In other words my question is how did you make it work with out the wire plug in bottom of filter. ?
    Relocate the engine fuel filter to the rear next to the water fuel separator? That's a good idea, beastprojects did that on his Cummins.

    Click on the link to watch the video.



    The adapter for the fuel water separator comes with a new sensor.

    2017 RAM 2500 Big Horn sport appearance package, Auto Level Rear Suspension, MM3 "switch" Fully deleted - tuned by DRD, Fleece Cheetah, Airaid Jr. CAI, 3.5" Banks Monster intake horn, Pusher Boost Tubes, 5" TBE with a Flo~Pro Twister muffler, *** EGR disappear kit, Black Market Performance CAT fuel filter and water separator, Black Market Performance fuel heater, Black Market Performance head studs, AFE deep trans pan, Revmax trans cooler bypass, Revmax HD Valve Body, DPC Low stall converter with billet flywheel, AFE pro series rear diff cover, Amsoil throughout provided by mcsynthetics.myamsoil.com

  19. Thanks timshooter40, watersupply189 thanked for this post
    Likes timshooter40, watersupply189 liked this post
Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •