2015 led headlights

[Opie15]

Ok I currently have a hid kit in my 2015 ram quad beam lights I'm looking into switching to led what is a good kit that will function with the can bus system in my truck? Sorry if this is not the right section for this post.

2015 cummins 2500 crew cab w/ rf 68 s&b cold air,mbrp stainless 4" w/ muffler,mm3 tuner from double r diesel,xdr throttle valve delete,xdr egr delete,shibby plug kit, traxda 3.5"/2" lift, 20x12 hostile wheels w/35" amp at/g tires

 0 Comment(s)

[TexNeck]

Ok I currently have a hid kit in my 2015 ram quad beam lights I'm looking into switching to led what is a good kit that will function with the can bus system in my truck? Sorry if this is not the right section for this post.

2015 cummins 2500 crew cab w/ rf 68 s&b cold air,mbrp stainless 4" w/ muffler,mm3 tuner from double r diesel,xdr throttle valve delete,xdr egr delete,shibby plug kit, traxda 3.5"/2" lift, 20x12 hostile wheels w/35" amp at/g tires

Ive been running these for long enough for a recommendation - they are stupid bright- I went 6k and they are a nice white color. Plug and play- no codes, flickers, or lights on dash. 5 stars

https://www.amazon.com/gp/aw/d/B01H6...b_b_asin_title

 0 Comment(s)

[Opie15]

What year is your truck, only reason I ask is from what I understand the 2015 models are a little bit more finicky than others....I could be wrong though

2015 cummins 2500 crew cab w/ rf 68 s&b cold air,mbrp stainless 4" w/ muffler,mm3 tuner from double r diesel,xdr throttle valve delete,xdr egr delete,shibby plug kit, traxda 3.5"/2" lift, 20x12 hostile wheels w/35" amp at/g tires

 0 Comment(s)

[watersupply189]

I tried LED’s in my 2016 and they wouldn’t work half the time even with canBUS adapters added. I switched to HID’s and haven’t had an issue since.


2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights, Morimoto LED fogs plus a whole lot more!

 0 Comment(s)

[Opie15]

What brand are your hids I have the morimoto Mopar relay kit on mine but they are a cheap Ebay brand and I either have a bad ignitor or a bulb that is trying to go (drivers side flickers when it is lite and sometimes doesn't lite at all) thinking about upgrading to a better quality kit.

2015 cummins 2500 crew cab w/ rf 68 s&b cold air,mbrp stainless 4" w/ muffler,mm3 tuner from double r diesel,xdr throttle valve delete,xdr egr delete,shibby plug kit, traxda 3.5"/2" lift, 20x12 hostile wheels w/35" amp at/g tires

 0 Comment(s)

[watersupply189]

What brand are your hids I have the morimoto Mopar relay kit on mine but they are a cheap Ebay brand and I either have a bad ignitor or a bulb that is trying to go (drivers side flickers when it is lite and sometimes doesn't lite at all) thinking about upgrading to a better quality kit.

2015 cummins 2500 crew cab w/ rf 68 s&b cold air,mbrp stainless 4" w/ muffler,mm3 tuner from double r diesel,xdr throttle valve delete,xdr egr delete,shibby plug kit, traxda 3.5"/2" lift, 20x12 hostile wheels w/35" amp at/g tires

I bought mine from Diode Dynamics. 3 year warranty, no questions asked. Do you also have the canBUS adapters hooked to your lights? I recommend those if you don’t or else you may have issues with your lights.


2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights, Morimoto LED fogs plus a whole lot more!

 0 Comment(s)

[Opie15]

I bought mine from Diode Dynamics. 3 year warranty, no questions asked. Do you also have the canBUS adapters hooked to your lights? I recommend those if you don’t or else you may have issues with your lights.


2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights, Morimoto LED fogs plus a whole lot more!

I think it is all built into their harness from what I understood when I purchased. I know it has a set of capacitors for each light and 1 resistor and then of course the relay. I've had it for a while so I need to do some more research had them originally on my 1/2 ton ram I used to own. As i write this though i think the canbus adapters were part of the hid kit (FATHERS) was the brand if I remember correctly. I have been looking at the diode dynamics products looks like really good stuff! Thank you

2015 cummins 2500 crew cab w/ rf 68 s&b cold air,mbrp stainless 4" w/ muffler,mm3 tuner from double r diesel,xdr throttle valve delete,xdr egr delete,shibby plug kit, traxda 3.5"/2" lift, 20x12 hostile wheels w/35" amp at/g tires

 0 Comment(s)

[TexNeck]

2013

 0 Comment(s)

[watersupply189]

I think it is all built into their harness from what I understood when I purchased. I know it has a set of capacitors for each light and 1 resistor and then of course the relay. I've had it for a while so I need to do some more research had them originally on my 1/2 ton ram I used to own. As i write this though i think the canbus adapters were part of the hid kit (FATHERS) was the brand if I remember correctly. I have been looking at the diode dynamics products looks like really good stuff! Thank you

2015 cummins 2500 crew cab w/ rf 68 s&b cold air,mbrp stainless 4" w/ muffler,mm3 tuner from double r diesel,xdr throttle valve delete,xdr egr delete,shibby plug kit, traxda 3.5"/2" lift, 20x12 hostile wheels w/35" amp at/g tires

They are my go to when buying lights. I still had to add the canBUS adapters to the HID wiring even though the kit came with it built in. My canBUS is so sensitive that nothing will work without them.


2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights, Morimoto LED fogs plus a whole lot more!

 0 Comment(s)

[horseshu]

I have a 2015 tradesman 2500 the stock headlight assembly kept condensation in them I got a set of lights from vipmotez with led halo ring and led strip I put led bulbs in .they come with halogen no problems so far much brighter and no more condensation. Got them on Amazon

 0 Comment(s)