So I had to run to our district office today to drop off some trip logs and fuel receipts and came back to my buddy halfway done with my leveling kit. LOL. Looks like a completely different truck now!
20190905_150926.jpg
20190905_150948.jpg
So I had to run to our district office today to drop off some trip logs and fuel receipts and came back to my buddy halfway done with my leveling kit. LOL. Looks like a completely different truck now!
20190905_150926.jpg
20190905_150948.jpg
Looking good man!
Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
So, little update since I last posted.
Got a new mesh grille on
And I have a set of 17x9 +6 Black Rhino Armory wheels and 35x12.5 Gladiators en route from Custom Offsets
20190911_154735.jpg
Screenshot_20190911-211648_Chrome.jpg
I'm pretty stoked about getting the new tires and wheels on, I'll be taking out that rediculous pinch weld Friday to know for sure the tires won't touch anything. Some new radius arms will be a future endeavor when it's time for 37s.
If y'all haven't seen them yet, check out the company Main Event. They make custom emblems for vehicles, I'm waiting on a quote for a Smokey Bear emblem to put on the mesh grille and will be getting the thin red line flag for the tailgate next week sometime.
Can’t wait to see it on your truck man!
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
IMG_20190915_133548_109.jpg
Finally decided to not be lazy this weekend and went ahead and threw my grid heater delete on. No seat of the pants change since I got a massive butt Dyno upgrade after the intake horn plus everything else. Overall I'm more relieved I got the box out of my truck than I am anything. Don't have to worry about my kids trucking to throw stuff into the box while I'm driving down the road. Haha.
Without the EGR stuff to worry about it's a two or so hour job. Ended up taking a grinder to one of my flare wrenches to get that danged sixth injector line, but everything went off without a hitch. Fit and finish seem too notch, and I'm ready to order my ARP 625+'s and start throwing the good stuff on next year. Haha. We'll see what my better half lets me get away with, I think if I can bag a few deer during hunting season I might get a little leeway.
@Custom Offsets got my wheels in today too, said they should be shipping out in one to two business days. So I hope to have them by next weekend to have them on the truck. Been a hot minute since I was this excited over wheels and tires.
2011 CCSB 2500 Laramie Longhorn, Banks elbow/grid heater delete, 5" ReadyLift, Fox 2.0 resv shocks, 20x12 SOTA AWOLs, 35x12.5 Cooper's, Sinister delete and intake, DV8 winch front bumper, 5" TBE no muffler 8" tip axle dump, MM3 with DRD tunes
Got the tires and wheels today! Little mistakes here and there from Custom Offsets, but hoping they'll make it right. I ordered the balancing beads, none of the tires have them. Two wheels had stick on weights that fell off en route to Florida, other two just didn't have anything on or in them. So I have that unbalanced wobble, hoping to order some dynabeads soon so I don't have to struggle bus around with a wobble happy truck on brand new tires. My fancy pants spiked caps didn't come in either so I just robbed the factory ones off my other wheels for the time being.
All in all, I'm super happy with the look of them, once they're balanced I'll be a real happy camper. That +6 offset tucks them perfectly under the fender flares imo.
20190918_150814.jpg
20190918_150853.jpg
20190918_150903.jpg
20190918_150939.jpg
Nice combo there! I like that look!
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
Looks sharp!!
Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
Good looking combo!
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
Looks awesome
Great job
Love the mesh grille
"Cumminsbadgirl"
2014 Laramie MC 3500 ( Aisin ) 4X4
MM3 Tuned by Double R Diesel
2014 CUMMINS "BADGIRL" Laramie MC 3500 (Aisin) 4X4 MM3 Tuned by Double R Diesel *** EGR delete AFE CAI 4” FLO-PRO w/muffler 4" Zone lift, Federal Couragia 37’s with Black Rhinos,bed carpet kit, tail-gate assist, Retrax tunnau cover
Previous "Cummins Badgirls" :
2006 Cummins 2500 4x4
2012 Cummins 2500 4x4
Bookmarks