I'm looking for advice on getting my 5inch exhaust snugged up it's loose from the muffler to back and is rubbing on the spair tire shield
I'm looking for advice on getting my 5inch exhaust snugged up it's loose from the muffler to back and is rubbing on the spair tire shield
I removed my spare tire and heat shield since I run 35s. Do you have you clamps turned the right way? Also, I had a bad clamp that wouldn't hold, replaced it and all is well.
Sent from my iPhone using Tapatalk
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
On further inspection it was the clamp rubbing up against the heat shield around the spare tire I turned it and put a pry bar up on the exhaust it was rubbing against the bed now the only thing is it
still shakes real bad
Sounds like one of your clamps is loose or maybe you’ve not seated a hanger good.
Sent from my iPhone using Tapatalk
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
You could replace the loose clamp with a lap band clamp.
Bookmarks