Originally Posted by
WSPRNI
Hey all,
Need some help. Details first, 2011 ram 2500, 6.7 EGR deleted, Mini Max Programmer and a 5 inch FLO~PRO turbo back.
Now the issue. Remote started it up in the mountains and it immediately sounded like the exhaust brake was on. Threw a ton of codes, P226c P2563 P2228 P1193 P0102 P2262. I
ran a diagnostic on the programmer and tried shutting off and resetting the EB.
Didn't work. Truck would not register any boost, had zero power and i had to limp home blowing straight black some the entire way (at 7 mph) it wouldn't go any faster.
I have checked all hoses to make sure it didn't blow one off, i have checked the fuse in the engine and when i disconnected the cannon plug on the turbo it ran fine.
I haven't driven it since i disco'd. I don't know where else to look, I have read about the Map and MAF sensors but would that affect everything like it did?
I also saw that the circuit board on the turbo could have fried and could cause half of the issues.
HELP!
Bookmarks