Thanks Thanks:  4
Likes Likes:  5
Results 1 to 6 of 6

Thread: 2016 engine tick at start up

  1. Top Of Page | #1
    Basic Member R.Worthen's Avatar

    User Info Menu

    2016 engine tick at start up

    Hello all,

    I have a 2016 2500, just over the past few months I have noticed a loud ticking noise during startup and goes away after about 30 seconds which sounds like a sticky lifter.

    I would assume it is not with the solid lifters.

    Fresh oil Rotella 15/40 and still noisy, oil changes ever 7-8000.

    Any ideas or thoughts?

    Thanks


  2. Top Of Page | #2
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    Re: 2016 engine tick at start up

    How many miles is on your engine?

    "The grass is greener where you water it"


  3. Top Of Page | #3
    Old & Grumpy! Polaraco's Avatar

    User Info Menu

    Re: 2016 engine tick at start up

    The rear bolts on the exhaust manifold have a tendency to loosen up. Check them out. If they are real loose, you may need a gasket.

    Unless the valves are really lose, it may not be likely. The exhaust leak could be a mid range, throaty type tick. It won't sound metallic. Belts can fool you too. I have one that sounds like a bad bearing


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

  4. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS liked this post
  5. Top Of Page | #4
    Basic Member R.Worthen's Avatar

    User Info Menu

    Re: 2016 engine tick at start up

    Hi, I have just under 100k


  6. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS, Jsol5 liked this post
  7. Top Of Page | #5
    Basic Member R.Worthen's Avatar

    User Info Menu

    Re: 2016 engine tick at start up

    Hi thanks for the reply.

    I will check that out for sure.


  8. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS liked this post
  9. Top Of Page | #6
    Old & Grumpy! Polaraco's Avatar

    User Info Menu

    Re: 2016 engine tick at start up

    Quote Originally Posted by R.Worthen View Post
    Hi, I have just under 100k
    It's due for a valve adjustment then, but they shouldn't be that loose.

    I'd have to hear it to be more help and point you at the right direction.


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

  10. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •