15k miles? How many times were the tires rotated? In 15k miles they should have been rotated at least 3 times.
15k miles? How many times were the tires rotated? In 15k miles they should have been rotated at least 3 times.
2021 2500 68RFE..... I'll just keep the goodies a secret!!!
Use Thuren fab specs. Do not use factory toe specs, Total toe should be less than .05 .This will solve all of your outer edge tire wear. I’ve had shops fight me on this and even one that set it back after I told them not to it. This has solved all my outer edge tire wear.
One thing I found out long ago was it isn't always mechanical. Most times it will show wear indicating mechanical first. If not ...
Verify you have the right pressures first, then go mechanical. After all the tires I've bought, each seems to be different in needed pressure verses the recommended ratings on the doors or the dealership. Usually not by much, but has been critical in tire life. When I get new tires, I do what is in the attached movie clip. I don't change until I change brands or type of tires.
If this doesn't work, then look at mechanical.
It isn't the greatest clip, but informative.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
Bookmarks