I recently had transmission upgraded and now I'm getting a DTC code P0933.
How do i get this fixed?
I recently had transmission upgraded and now I'm getting a DTC code P0933.
How do i get this fixed?
Common Problems that trigger the P0933 code are:
- Hydraulic power unit assembly failure
- Transmission Control Module (TCM) failure
- Wiring issue
Hope that helps friend.
We just had this in another post. Broken wire
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
With this code a person may be having intermittent slipevents while in gear.
The usually culprit is the connection with the line pressuresensor.
This sensor is on passenger side of trans, back of main casejust above the oil pan edge.
First you can check the connection of this sensor/Harness. It clip/locks , so unclip it , then unplug it. Clean and check and make sure its connected correctly.
BTW, in the future itwould help if you put on your thread, theyear/model/ and what transmission you have. There are 2 diff automatics and I’m writing this assuming what trannyyou have
Also include things like recent work that you had done. How recent.
Do depending on what was done on the trans. That sensor , harness could have been damagedor just not seated correctly when they did the work.
Is the work you had done have a warranty?
2017 WON TON CC LB 68AUTO
Secret stuff that make it vroom and whistle better Thuren 2.25 w/2.0 Fox Resi
Justin
Southern Oregon ( the Republican part)
UNITEDSTATES MARINE CORPS 1993-2007
No better friend, No better enemy.
Yes sorry this is a 2016 ram 2500 with the crappy transmission so you guessed it right. (68RFE). The work i had done was a week and a half ago and has been doing it every sense. On my mm3 the transmission pressure desired at rest is 100. The transmission actual is 150.
Jumped thread- question asked already Was there no warranty with the work provided? I would have the folks check their work
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Bookmarks