Thanks Thanks:  2
Likes Likes:  1
Results 1 to 10 of 10

Thread: Raceme Ultra w/ 2nd Gen Swap

  1. Top Of Page | #1
    Basic Member Larry1009's Avatar

    User Info Menu

    Raceme Ultra w/ 2nd Gen Swap

    My factory turbo actuator is going out and I have a raceme ultra and I am wanting to do a 2nd gen swap.

    Is there anything I need to do to make sure I do not get the codes from not having a factory turbo any longer?

    Can someone give advice on this matter?


  2. Top Of Page | #2
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    Re: Raceme Ultra w/ 2nd Gen Swap

    You'll need custom tuning for that friend.

    "The grass is greener where you water it"


  3. Thanks Larry1009 thanked for this post
  4. Top Of Page | #3
    Basic Member Larry1009's Avatar

    User Info Menu

    Re: Raceme Ultra w/ 2nd Gen Swap

    Dang that is what I was afraid of. So the ultra doesn’t support 2nd gen swap unless custom tuning is present?


  5. Top Of Page | #4
    TW24COUGARS's Avatar

    User Info Menu

    Re: Raceme Ultra w/ 2nd Gen Swap

    How do you know the actuator is going out?


    2013 | Ram 2500 | 4 door | Short Bed | MM3 by DRD | S&B Cold Air Intake | Jamo 4inch TB Exhaust |Shibby Plugs | Supernova V4 LED Bulbs |

    2013 Ram 2500, 4 door, short bed, MM3 by DRD, S&B Cold Air Intake, Jamo 4inch Exhaust with muffler and tip, Shibby Plugs, Supernova V4 LED headlight bulbs

  6. Top Of Page | #5
    Basic Member Larry1009's Avatar

    User Info Menu

    Re: Raceme Ultra w/ 2nd Gen Swap

    I lose boost and my exhaust break stops working. And the codes that are popping up are P00AF and P003A.


  7. Top Of Page | #6
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    Re: Raceme Ultra w/ 2nd Gen Swap

    Quote Originally Posted by Larry1009 View Post
    Dang that is what I was afraid of. So the ultra doesn’t support 2nd gen swap unless custom tuning is present?
    Correct friend.

    "The grass is greener where you water it"


  8. Top Of Page | #7

    Re: Raceme Ultra w/ 2nd Gen Swap

    Guys- I couldn't help it but had to jump on this thread due to problems w/ what seems to be the actuator. Although I only get the u010c trouble code saying "I've lost communication w/ the turbo/super charger control module. I had this pop up right after i done my last oil change about 2 months ago; been clearing the DTC out w/ my Ultra, but it comes back on in a few days.

    Any suggestions on what might be causing it other than the actuator before I do a 2nd Gen Swap???


    2014 RAM 2500 Laramie Longhorn Edition, 5" afe TBE Exhaust, S&B Cold Air Intake, GDP EGR Delete, GDP Throttle Valve Delete, RaceMe Ultra Tuner w/ DRD Custom Tunes, Rough Country 2.5" Leveling Kit, Rough Country 3.0 Shocks, Gladiator QR900-MT 35x12.50x18

  9. Top Of Page | #8
    Basic Member Larry1009's Avatar

    User Info Menu

    Re: Raceme Ultra w/ 2nd Gen Swap

    This is some info that I have received as I emailed raceme Canada.
    Hello,

    You do not need custom tuning for your swap.
    The "box" tunes work fine as they have the provisions for the turbo speed sensor and the actuator.

    -----Original Message----- From: Larry Hampel
    Sent: Monday, June 17, 2019 7:22 PM
    To: tech@racemecanada.com
    Subject: Re: Gen 2 swap

    Basically, I need to know if the ultra box tunes will work to do the swap or do I have to have custom/ additional tuning for this type of modification?

    Sent from my iPhone

    Attached Images Attached Images

  10. Top Of Page | #9
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    Re: Raceme Ultra w/ 2nd Gen Swap

    @Double R Diesel what are you thoughts on box tuning with a 2nd Gen Swap.

    Has RaceME Canada lost their minds?

    "The grass is greener where you water it"


  11. Top Of Page | #10
    Daily Grinding! RamIt's Avatar

    User Info Menu

    Re: Raceme Ultra w/ 2nd Gen Swap

    Quote Originally Posted by Larry1009 View Post
    This is some info that I have received as I emailed raceme Canada.
    Hello,

    You do not need custom tuning for your swap.
    The "box" tunes work fine as they have the provisions for the turbo speed sensor and the actuator.

    -----Original Message----- From: Larry Hampel
    Sent: Monday, June 17, 2019 7:22 PM
    To: tech@racemecanada.com
    Subject: Re: Gen 2 swap

    Basically, I need to know if the ultra box tunes will work to do the swap or do I have to have custom/ additional tuning for this type of modification?

    Sent from my iPhone
    Yeahhhhhhhhhhhhhhhhhhhhhh, no. What @IGOTACUMMINS said.


  12. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •