Are you running factory charger? Who has provided tunes?
Are you running factory charger? Who has provided tunes?
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Ray's s tuning.
Currently running the factory charger, adding an S475 shortly to the factory charger.
I'd like to monitor DP after adding the S475, just not sure the best way of accomplishing this.
Factory charger drive pressure will be about 1.5x boost.
Best way is what Joe mentioned which is the analog gauge getting a reading from the collection area of manifold.
You should be about 1:1 drive pressure after adding 475 and changing manifold etc.
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
I’m running isspro factory match gauges. Boost, Egt, and Drive pressure.
I really like them I’ve put about 30k miles on the drive pressure gauge and have had no problems with soot build up on the sensor.
Some sites have combo kits but none I saw had that combo with a drive pressure gauge so I bought all separately which cost a bit more than the kits.
Sent from my iPhone using Tapatalk
Thanks for the input and sorry for the slight hijack.
I was looking at options for housing size and am being told that dropping to a 1.15 housing will light quicker but also increase drive pressure.
I figured for data logging, and making the decision on housing size, making sure I'm at 1:1 with the larger AR housing and not above will be a good deciding factor.
Apparently using the MM3 to monitor exhaust pressure is an option, albeit not as reliable as a mechanical gauge additionally, you have to subtract "atmosphere" from the reading.
Not sure what that would be in reference to. (info on exhaust pressure pid/atmosphere from another thread on the site).
Which other housing were you looking at?
I wouldn’t be worried about lighting a 475 with stock charger.
Driveability will be great even with a larger housing.
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
The cover on it as it comes is a 1.32.
@Bpbertolacini what exhaust housing size did you choose for your 475?
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
It was a 1.32 no problems with the factory VGT getting it to spool but I do have a steed speed t4i
16 cummins Laramie longhorn, ccsb, 35x12.5x20 xplora mts ,tis wheels,fully deleted, pusher add a turbo kit,stainless diesel 475 5blade turbo over 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,ARP 625 headstuds,steedspeed t4i manifold , S&S 80% over injectors, thuren rear trackbar, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.
Thanks for the info.
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Bookmarks