Anyone a small engine mechanic?

**RamHunter18** · 05-02-2019

Originally Posted by Dwelsh

I couldnt find a mixture screw. Theres really no adjustments on the carb. Looking at the carb diagram. I missed 2 jets. But they are on the top of the carb and have these little freeze plug type deals covering them up. But i also didnt think of using wire to run through th4 holes. I appreciate it man. You sure you dont wanna come down to nc? Its been high 80s this week LOL. Thanks man

How was the float valve? They tend to gum up and stick in the bore also

0 Comment(s)

**Dwelsh** · 05-02-2019

Originally Posted by RamHunter18

How was the float valve? They tend to gum up and stick in the bore also

Its actually got a solenoid that mounts to the bowl on the carb that actuates to let fuel into the carb. I tested that yesterday and cleaned it also. It actuates with a powerprobe and also is getting voltage when the mower is running. So as far as i can tell its working the way it should. Cant see inside the carb to see whats going on though unfortunately LOL.

0 Comment(s)