Why is there such a high labor charge for this? It appears to be about $800 average and they say it will take 4-5 hours. Unless I go with EFI live..
Why is there such a high labor charge for this? It appears to be about $800 average and they say it will take 4-5 hours. Unless I go with EFI live..
Which ends up $600 less.. I misspoke, the labor is the same, EFI is just less.
If someone is charging you $125/hr or more I'd find a new shop. How savvy are your wrenching skills? I've had EFI and the MM3 and I like the MM3 much better.
Sent from my SM-G892A using Tapatalk
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
My wrenching skills are excellent with limitations. I would have trouble with the passengers side of the motor in the back. I lost my left arm and those would be a *****. Swapping out the exhaust pipe would be interesting also.. LOL Having just had surgery on my right shoulder, I'm not anxious to screw it up and go through that again.. LOL
Yeaaa that would be a problem LOL, my apologies. The stock exhaust is heavy.
Sent from my SM-G892A using Tapatalk
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
Not a problem at all.. LOL If you knew the crazy stuff I've done one handed you would shake your head!!
Just because you are getting codes for the EGR that doesn't mean you need to remove it. A simple delete pipe for the exhaust and a tuner is all you really need. The diner will clear the codes and truck will ignore the EGR afterwards. Would really cut down on the labor and overall cost.
Greg
2012 | RAM 2500 | CCSB | MM3 tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
Also, where are you located? We might have a forum member near by that would be willing to help.
Greg
2012 | RAM 2500 | CCSB | MM3 tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
800 for what? Installing the mm3 and flashing in the tune, swapping out the exhaust, and removing the egr valve and cooler and installing block off plates? You supplying all the parts?
I got a written estimate. I am not supplying the parts. Tuner $1300, Delete Kit $200, Exhaust $300, labor $800.... Yes labor to install those parts $800. After watching how it's done on Utube, it's a "tad" high! I wasn't surprised to find another local shop with the exact same price.
Bookmarks