Thanks Thanks:  2
Likes Likes:  10
Results 1 to 6 of 6

Thread: Flush Reverse Lights

  1. 04-25-2019 Top Of Page | #1
    Muddy1
    Muddy1 is offline
    Muddy1's Avatar

    User Info Menu

    Flush Reverse Lights

    Not cutting any corners with this build.
    Rigid Industries Midnight SR-Q flush.

    This is how I went about installing them, dremal tool and a file. I like to do a bead of silicone instead of the rubber gasket that comes with them. As for the wiring, I swapped the stock reverse bulbs for led to free up some current on the circuit, then just spliced them in.

    I plan to do some aux switches at some point, at that time I'll run power line back to them and put a diode on each side so I can turn just the rigids on without back feeding the reverse light circuit.

    Sent from my SM-G960U using Tapatalk

    Register To Reply
  2. Post Thanks / Like
    Thanks watersupply189, AnOldBiker thanked for this post
    Likes 4kids2dogs&RV, david3gen, watersupply189, AnOldBiker liked this post
  3. 04-25-2019 Top Of Page | #2
    watersupply189
    watersupply189 is offline
    MOD watersupply189's Avatar

    User Info Menu

    Re: Flush Reverse Lights

    Quote Originally Posted by Muddy1 View Post
    Not cutting any corners with this build.
    Rigid Industries Midnight SR-Q flush.

    This is how I went about installing them, dremal tool and a file. I like to do a bead of silicone instead of the rubber gasket that comes with them. As for the wiring, I swapped the stock reverse bulbs for led to free up some current on the circuit, then just spliced them in.

    I plan to do some aux switches at some point, at that time I'll run power line back to them and put a diode on each side so I can turn just the rigids on without back feeding the reverse light circuit. https://uploads.tapatalk-cdn.com/201...8ff57f240d.jpghttps://uploads.tapatalk-cdn.com/201...c409d9f3d2.jpghttps://uploads.tapatalk-cdn.com/201...102cf0f1f7.jpghttps://uploads.tapatalk-cdn.com/201...f44adfbe87.jpghttps://uploads.tapatalk-cdn.com/201...b36227245a.jpghttps://uploads.tapatalk-cdn.com/201...229358b1ce.jpg

    Sent from my SM-G960U using Tapatalk
    That looks really good!!


    2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56
    Register To Reply
  4. Post Thanks / Like
    Likes david3gen, AnOldBiker liked this post
  5. 04-26-2019 Top Of Page | #3
    AnOldBiker
    AnOldBiker is offline
    Old... But Still Here! AnOldBiker's Avatar

    User Info Menu

    Re: Flush Reverse Lights





    Jim

    2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17

    "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
    Register To Reply
  6. Post Thanks / Like
    Likes watersupply189 liked this post
  7. 04-26-2019 Top Of Page | #4
    03 unicorn
    03 unicorn is offline
    Basic Member 03 unicorn's Avatar

    User Info Menu

    Re: Flush Reverse Lights

    Looks nice

    Register To Reply
  8. Post Thanks / Like
    Likes watersupply189 liked this post
  9. 04-26-2019 Top Of Page | #5
    DDP
    DDP is offline
    DDP's Avatar

    User Info Menu

    Re: Flush Reverse Lights

    Quote Originally Posted by Muddy1 View Post
    Not cutting any corners with this build.
    Rigid Industries Midnight SR-Q flush.

    This is how I went about installing them, dremal tool and a file. I like to do a bead of silicone instead of the rubber gasket that comes with them. As for the wiring, I swapped the stock reverse bulbs for led to free up some current on the circuit, then just spliced them in.

    I plan to do some aux switches at some point, at that time I'll run power line back to them and put a diode on each side so I can turn just the rigids on without back feeding the reverse light circuit. https://uploads.tapatalk-cdn.com/201...8ff57f240d.jpghttps://uploads.tapatalk-cdn.com/201...c409d9f3d2.jpghttps://uploads.tapatalk-cdn.com/201...102cf0f1f7.jpghttps://uploads.tapatalk-cdn.com/201...f44adfbe87.jpghttps://uploads.tapatalk-cdn.com/201...b36227245a.jpghttps://uploads.tapatalk-cdn.com/201...229358b1ce.jpg

    Sent from my SM-G960U using Tapatalk
    Looks great! Let me know when your ready for some aux switches. I have some that are wireless that makes it super easy!

    Matthew 6:9-13, 2 Corinthians 5:20
    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email us at:
    sales@ddpmotorsports.com
    www.ddpmotorsports.com

    Register To Reply
  10. Post Thanks / Like
    Likes watersupply189 liked this post
  11. 04-26-2019 Top Of Page | #6
    Power247
    Power247 is offline
    No Vacancy Power247's Avatar

    User Info Menu

    Re: Flush Reverse Lights

    Nice install!

    Greg
    2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
    2016 | Heartland Pioneer | DS310

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI
    Register To Reply
  12. Post Thanks / Like
    Likes watersupply189 liked this post
« Pillar Mounts in Arizona | 2016 ram 2500 megacab hyper blinker »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules