Thanks Thanks:  0
Likes Likes:  2
Results 1 to 7 of 7

Thread: Edge juice w/ attitude problems

  1. Top Of Page | #1
    Basic Member Andrew Kulikowski's Avatar

    User Info Menu

    Edge juice w/ attitude problems

    Hello, I recently bought a 01 24v and it came with a edge juice module but no monitor. So I spent the 400 and some change for the monitor and now I'm having some problems. When I first installed it my lift pump burn up I dont know if it was the edges fault or if it was just old. I finally got a new lift pump in and now with the edge and any setting it runs rough and is misfiring in all rpm ranges. Now there is a bully dog box under the hood and I'm not to knowledgeable on the whole stacking aspect but could it be too much timing? I've unplugged to edge from the obd2 and the truck runs fine. Any thoughts?


  2. Top Of Page | #2
    DDP's Avatar

    User Info Menu

    Re: Edge juice w/ attitude problems

    I have never been for stacking but a lot of people do it. As far as the misfiring it may be where the edge taps into the pump wire possibly. Have you checked all the connections?


    Sent from my iPhone using Tapatalk

    Matthew 6:9-13, 2 Corinthians 5:20
    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email us at:
    sales@ddpmotorsports.com
    www.ddpmotorsports.com


  3. Likes david3gen liked this post
  4. Top Of Page | #3
    Basic Member Andrew Kulikowski's Avatar

    User Info Menu

    Re: Edge juice w/ attitude problems

    I have not yet but I will be sure too thank you


  5. Top Of Page | #4
    Msquare's Avatar

    User Info Menu

    Re: Edge juice w/ attitude problems

    What kind of lift pump are you running? Do you have a fuel pressure gauge installed?

    2015 2500 Crew Cab 4x4, Totally Stock Cummins, ARE Z Series Canopy, Cargo Glide, Carli Backcountry 3", 35/12.5/20 Toyo AT II, Radenso XP, Console Vault, Duraflaps

  6. Top Of Page | #5
    Basic Member Andrew Kulikowski's Avatar

    User Info Menu

    Re: Edge juice w/ attitude problems

    I have a raptor 4G 100gph and I only have the gauge on the edge


  7. Likes Msquare liked this post
  8. Top Of Page | #6
    Msquare's Avatar

    User Info Menu

    Re: Edge juice w/ attitude problems

    What kind of fuel pressure are seeing?

    Did you pierce the pump wire?


    Sent from my SM-N960U using Tapatalk

    2015 2500 Crew Cab 4x4, Totally Stock Cummins, ARE Z Series Canopy, Cargo Glide, Carli Backcountry 3", 35/12.5/20 Toyo AT II, Radenso XP, Console Vault, Duraflaps

  9. Top Of Page | #7
    Msquare's Avatar

    User Info Menu

    Re: Edge juice w/ attitude problems

    I'd pull the bully dog and try running the Edge by itself.

    Edge was THE box on the 2nd gens! I started with an EZ, then a Comp and finished with a Drag Comp.

    Totally agree with the earlier comment about stacking. Never needed it.

    My 02 dyno'd at 456 hp and 981 tq. Daily driver.

    Sent from my SM-N960U using Tapatalk

    2015 2500 Crew Cab 4x4, Totally Stock Cummins, ARE Z Series Canopy, Cargo Glide, Carli Backcountry 3", 35/12.5/20 Toyo AT II, Radenso XP, Console Vault, Duraflaps

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •