Thanks: 21
Likes: 65
Hey guys and gals,
Just wanted to let everybody know that Auxbeam F-16 series LED headlight bulbs fit in the quad headlight housings and allow you to use the dust/water cap on the back of the housings.
They are also direct plug and play requiring nothing more than what comes in the box.
2012 Ram 3500 CCLB, Tuned by DRD!
2012 Ram 3500 Laramie CCLB, Tuned by DRD, 4 inch FloPro, Bilstein 5160's
SeveredCummins14, watersupply189, david3gen, cumminsdieselfreak, walla2k5, AnOldBiker, SyN, Megarebel308, Murph liked this post
Looks good!
Any problems with using these bulbs and the canBUS system?
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
No problems at all, direct plug and play.Originally Posted by watersupply189
Looks good! Any problems with using these bulbs and the canBUS system?
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....
Each set of bulbs was $49.99 on amazon.
They are very bright!
Low Beams:
High Beams:
2012 Ram 3500 CCLB, Tuned by DRD!
2012 Ram 3500 Laramie CCLB, Tuned by DRD, 4 inch FloPro, Bilstein 5160's
I used the exact same ones and they work great, no problems with the canbus system at all. only downside with them is the plug is really cheesy and does not give a tight fit. Like he said you can put the dust cap back in so it shouldn't be a problem, but I still put some dielectric grease on the end of the plugs for a little extra protection.
watersupply189 thanked for this post
Man those lights are bright!! I tried LED’s in my truck but the canBUS system is very picky in mine and the lights wouldn’t work half the time even having canBUS adapters added. HID in the projector headlights works great in my truck with no issues at all. I did install the Morimoto LED fog lights and they work great compared to just adding the LED bulbs to the factory fog light housing.
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
I have used these bulbs on my Toyota's and currently in my truck as well, they do great!
They come with the CanBus adapters, I'd recommend these.Looks good! Any problems with using these bulbs and the canBUS system?
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
watersupply189 thanked for this post
I use Supernova V4 from Headlight Revolution. No issues at all, love them. They pump out about 3,600 lumen per bulb.
Sent from my iPhone using Tapatalk
2013 Ram 2500, 4 door, short bed, MM3 by DRD, S&B Cold Air Intake, Jamo 4inch Exhaust with muffler and tip, Shibby Plugs, Supernova V4 LED headlight bulbs
I have heard good things about the V4, just couldn’t justify spending that much. The Auxbeam are only 3,000 lumen per bulb, but I also got all 3 sets of bulbs (High, Low, and Fog) for $150. They fit the bill for me.
2012 Ram 3500 CCLB, Tuned by DRD!
2012 Ram 3500 Laramie CCLB, Tuned by DRD, 4 inch FloPro, Bilstein 5160's
SyN thanked for this post
Did you put the 9005 bulb in the fog lights? Ordered some for my truck and had issues putting the fog lights in.
2016 2500 Big Horn Maximum Steel, fully deleted, mm3 by DRD, banks monster ram, s&b cold air intake, 4” MBRP, DRT Trans billet valve body, BD power trans pan, ats thermal bypass valve, shibby plugs, RC leveling kit, airlift 5000# air bags, 295/65-20 Nitto trail grapplers.
Yes I put the 9005 in my fogs, took some finagling to get them to fit since the tabs on the 9005 aren’t an exact match for the 9145 (stock) tabs. I believe in 2013 the trucks switched to 9006 fogs.
2012 Ram 3500 CCLB, Tuned by DRD!
2012 Ram 3500 Laramie CCLB, Tuned by DRD, 4 inch FloPro, Bilstein 5160's
Posting Permissions
Register To Reply
Bookmarks