Does anyone know where I can get a Amsoil bp89 fitting or equivalent.I can not seem to find one in my area[ south jersey near woodbury]. THANKS MIKE
Does anyone know where I can get a Amsoil bp89 fitting or equivalent.I can not seem to find one in my area[ south jersey near woodbury]. THANKS MIKE
You should be able to buy one from amsoil replacement parts if im not mistaken. I know it's not local but as a last resort.
Matthew 6:9-13, 2 Corinthians 5:20
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email us at:
sales@ddpmotorsports.com
www.ddpmotorsports.com
@bigbaddog
Been a very long time since I noticed those fittings, but I thought they were some what common. Have you checked NAPA ?
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
Thanks for the idea about NAPA. I checked their site and did not see anything that would work Mike
Going to check a hyd. shop that I used when I was working. They have or can get a lot of odd ball stuff. Mike
Guess NAPA couldn't help. They usually cover 80%+ of everything I need for fittings. Fastenal does the others.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
I used this when piecing together my DIY bypass. I drilled and tapped a billett cap
C695CB58-A9BD-4723-B4D8-6229F1DC6C6B.jpg
813EC6CB-E9B2-4E86-8853-6EA10D3807BC.jpg
2013 CCSB 2500 G56 Tradesman
Its been awhile since I have been on here.I used a hyd swivel from a Meyers plow [3/8 in pipe] and a reducer [3/8p to 1/4 hose]. Had to get a after market cap and drill and tap it.Not as nice looking as I would like but it works. Mike
Bookmarks