All. Just installed my 5” turbo back exhaust and custom tunes by DRD. Just wanting to make sure I disconnected everything I need to. Anyone have a list or link for electrical disconnect locations? Thank for all of your help!
All. Just installed my 5” turbo back exhaust and custom tunes by DRD. Just wanting to make sure I disconnected everything I need to. Anyone have a list or link for electrical disconnect locations? Thank for all of your help!
Just the throttle valve is the only recommended thing besides exhaust. Its by the intake horn. Don't confuse it with the map sensor like I did!
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Throttle valve is a must do.
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
just exhaust plugs thats it rays tunes take care of the rest thats what i didon my 2017 didnt have to mess with egr or throttle valve
You can run Rays tunes with it plugged in (I did for a while) but Ray does recommend unplugging it. I guess some trucks may still try to have it function with his tuning. Next time you have the hood open unplug it and ziptie it to the side. Its a 30 second job.
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Is there anyway to protect those unplugged plugs besides the shibby kit? Sorry, n00b question LOL. Just budgeting for my parts this spring!
for short term on the super cheap- ziplock back and zip ties. Try and tuck em up outta the wind. I still have mine exposed but made sure they were facing down...hoping gravity will work and keep moisture out for an extended period of time
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
I had moisture and corrosion get in one of mine which caused it to throw some codes. I figure the plug kit is worth the extra coin.
Sent from my SM-G950U using Tapatalk
2012 CCSB Saddle Brown Pearl... DRD tuned
I better buy my kit before the EPA takes them away too
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Roll of electrical tape works just fine
Bookmarks