Thanks for the ideas! I've been looking to add extra lighting to the back bumper
Thanks for the ideas! I've been looking to add extra lighting to the back bumper
Thanks everyone for the great info
Not bad for a rookie.
I welded something under there because i wanted them way out. The further apart the better.
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
They don’t get beat up with mud and rocks?
Sent from my iPhone using Tapatalk
IMG_E2224.jpgIMG_E1804.jpgIMG_E1805.jpgIMG_E1806.jpg
I used Rough Country flush mounts in my rear bumper and used Rigid Industries backup harness to power it. The harness comes set up with a 3 way switch (ON/off/REV). I'll put the link to the harness.
https://www.rigidindustries.com/sr-m...ess-40192.html
2019 Ram 2500. 8” FTS Lift. 38x15.50 Fury MT’s on 26x14 XF Offroad wheels.
2013 Ram 2500 Big Horn 4x4/Raceme Ultra with DRD WARP tunes/EGR, Throttle Valve, DPF Delete, 4'' FloPro/5'' Rough Country Lift Kit with 37's on 22" Fuel Flow
Looks clean man. Good work!
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Looks good man!!
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
I did something similar, works well.
Sent from my XT1650 using Tapatalk
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
That's about what mine look like
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Installed these Rigid LEDs yesterday. Still need to wire them.
On a different question. Have any of you replaced your reverse lights with LEDs? I did and now my display shows reverse light out. Im assuming the resistance of the LEDs are lower than the factory lights. I haven't measured the resistance to compare but I'm assuming all that's needed is to put a certain ohm resistor inline with the new LEDs. Anyone had to do this?
fullsizeoutput_3c0f.jpg
2018 Pearl White Ram 2500 Cummins 6.7, 5" RC Lift with 37x13.5r20 Nitto Ridge Grapplers, Fuel Maverick, RC Steering Stabilizers, 4.10 gears, RevMax VB, RIGID Led bumper lights
Bookmarks