2012 Headlight Issues

[PWRWAGN]

Are you running canBUS adapters with these LED’s? I’ve tried LED’s before with the adapters and lights would only work half the time. I have HID’s in both my headlights and fogs with zero problems with the headlights going on two years now but my fog lights are giving me a fit staying on. I’ve replaced the ballast three times and the canBUS adapters but it only lights up when it wants too. Are these LED’s working correctly in your truck?
If so I may give them a try.

The V4s and the rest came with the PWM modules that are meant to prevent any problems. Ive only had them installed for a couple weeks but no problems so far at all. Very happy. I considered going HID but after doing some research I went with these LEDs and Im glad I did. I don't know if the 2016 is different but they came with everything I needed to install. Had to drill holes in my high beam dust caps but they came with grommets so its really easy. I think it took me about 2 hours total and thats with removing the grille etc. Pretty much plug and play.

 0 Comment(s)

[watersupply189]

The V4s and the rest came with the PWM modules that are meant to prevent any problems. Ive only had them installed for a couple weeks but no problems so far at all. Very happy. I considered going HID but after doing some research I went with these LEDs and Im glad I did. I don't know if the 2016 is different but they came with everything I needed to install. Had to drill holes in my high beam dust caps but they came with grommets so its really easy. I think it took me about 2 hours total and thats with removing the grille etc. Pretty much plug and play.

Thanks for the response. I think I’ll do some more research on these LED’s.


2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....

 0 Comment(s)