My fuel heater on the fuel filter canister is leaking due to the o-ring being bad. Does anyone know what size the o-ring? My truck is a 99 ram 2500. I’ve attached a photo of itIMG_1369.jpg
Sent from my iPhone using Tapatalk
My fuel heater on the fuel filter canister is leaking due to the o-ring being bad. Does anyone know what size the o-ring? My truck is a 99 ram 2500. I’ve attached a photo of itIMG_1369.jpg
Sent from my iPhone using Tapatalk
I'm not sure off the top of my head but are you able to remove it to take it to a parts store? I would imagine it would be a fairly common size.
Matthew 6:9-13, 2 Corinthians 5:20
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email us at:
sales@ddpmotorsports.com
www.ddpmotorsports.com
The manual doesn't give the size. Just make sure the parts guy knows it for diesel use. I had a guy give me an o-ring that didn't hold up and leaked later.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
Here's what you can do. Pull the heater, measure it, and smear a thin coat of RTV around the oring. DO NOT put any below the ring. If you do, wipe it off. put it back in and Let it sit an hour or two and you can drive it. That should dam up the leak until you get the rings
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
I ended up getting the right size o-ring.
It’s 3/32 x 3/8 ID x 9/16 OD. Replaced the o-ring so far no issues
Sent from my iPhone using Tapatalk
The best repair is the right repair
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Bookmarks